PAXP0000 LED Indicator - Process Signals INPUT SIGNALS: Voltage Signal (Self Powered) Current Signal (2 wire requiring excitation) Terminal 4: +ADC Terminal 5: –ADC Terminal 4: +ADC Terminal 6: –ADC 20 mA Terminal 3: +VDC Terminal 5: –VDC Current Signal (Self Powered) The PAXP LED Indicator Panel Meter is a 5-digit panel mount display for digital readout of process signals. This model has a red sunlight readable LED. The intensity of display can be adjusted from dark room applications up to sunlight readable, making it ideal for viewing in bright light applications. Input: Range Impedance/ Compliance Maximum Continuous Overload Display Resolution Optional digital output cards provide the meter with two set-point relay outputs. The set-point alarms can be configured to suit a variety of control and alarm requirements. A linear DC output signal is also available as an optional card. The card provides either 4 to 20mA or 0 to 10V signals. Once the meters have been initially configured, the parameter list may be locked out from further modification in its entirety or only the set-point values can be made accessible H&B Sensors Ltd | Odyssey House | Durban Road | Bognor Regis | West Sussex | PO22 9RH | United Kingdom Tel: +44(0)1243 866866 | Email: [email protected] | www.hbsensors.com

LED Indicator - Process Signals 5 digit, 14.2 mm red sunlight readable LEDs, 2300 Vrms for 1 min. to all inputs and outputs. MAX maximum readout selected MIN minimum readout selected TOT totalizer readout selected, flashes when total overflows SP1 setpoint alarm 1 is active SP2 setpoint alarm 2 is active Units Label optional units label backlight CE Approved EN 61326-1 Immunity to Industrial Locations Emission CISPR 11 Class A Safety requirements for electrical equipment for measurement control, and laboratory use: EN 61010-2-030 Particular Requirements for Testing and Measuring Circuits RoHS...