HBS16001 LED Loop Powered Indicator Environmental Conditions Ambient (-20 to +75) °C Ambient Storage Ambient Humidity Common Specifications Display Input Specifications Input Range (4 to 20) mA input -1999 to 9999 decimal point selectable in any position Linear, Square root, Power 3/2, Power 5/2, User Characteristic Up to 20 pairs by straight line interpolation The HBS16001 is a loop powered LED indicator. Powered by a current loop the HBS16001 indicates the process value on a 4 digit LED display. The menu system is easily navigated by the use of three push buttons located on the rear of the display. The HBS16001 can have several linearizations applied or a custom characteristic can be entered. Hart Transparent Power Loop Drop Configuration The HBS16001 is configured using the buttons at the rear of the display. They configuration parameters include the following; • Security passcode protection. • Linearity type; linear, square root, X 3/2, X 5/2 or user interpolation. • Input scaling; the displayed PV values that correspond to the mA input signal. • Input scaling type; manual (user edits (4 to 20) mA PV values via keypad) or automatic (user applies high/ low mA signals, then device performs auto-scale). • User interpolated data; up to 20 co-ordinate pairs. • User offset; intended to offset the displayed PV by a userconfigurable amount. • Display resolution; 1, 0.1, 0.01 or 0.001 °C. • Configuration menu time out adjustment. • Reset to factory default. • Easy on-site re-calibration when required. H&B Sensors Ltd | Odyssey House | Durban Road | Bognor Regis | West Sussex | PO22 9RH | United Kingdom Tel: +44(0)1243 866866 | Email: [email protected] | www.hbsensors.com