UCR - Range Leaflet
1Pages

{{requestButtons}}

Catalog excerpts

UCR - Range Leaflet - 1

! GUYSON j GUYSON PULSATRON UCR - ULTRASONIC CLEAN AND RINSE Guyson's Kerry UCR aqueous ultrasonic clean and rinse systems provide a heated ultrasonic cleaning tank, an immersion rinse tank weiring to drain, and a hand held spray for final rinse. Ultrasonic transducers bonded to the tank base provide high performance and reliability together with uniform distribution of the ultrasonic energy. The frequency is tuned to the individual tank/transducer combination and then optimised under normal usage conditions with frequency sweep and fully automatic tuning. Guyson M300 (300W) ultrasonic generators for powerful cleaning and long equipment life Robust construction with 316L polished stainless steel tank for durability Thermostatically controlled solution heating from 20°C to 80°C Digital panel for precise control and display of sonics time and solution temperature Option of generator control with dual frequency for special applications Standard KS systems operate normally between 34 kHz and 40 kHz Options include: lid, basket, raising stand, level sensor, pumped filtration, heating to the immersion rinse, and deionised water spray rinse DUAL FREQUENCY OPTION Generators with dual frequency controls, switchable between 40 kHz and 80 kHz, are also available if required. The higher frequency allows sensitive or difficult parts - such as very fine precision components, intricately shaped parts or fine tubing - to be cleaned both safely and effectively. These can also provide variable power control, and will store a variety of cleaning programs in memory for automatic operation when required. Notes 1. Dual frequency Primewave® generator control, where fitted, is external to the tank. 2. Standard supply240 volt, 50 Hz, single phase. UCR1500 and larger UCR systems require 3-phase power supply 3. Larger sizes are available to order, please ask for details. KS FEATURES • Simply touching the select keypad toggles the LCD display through set time, set temperature, run time and run temperature. • Sonics time may be set in the range 0.1 to 99.9 minutes in 0.1 min increments, or to constant when sonics may be switched on and off manually. • Non-operation of sonics if solution temperature is more than 10°C above set temperature. • Optional low-level protection to prevent heater burn out if solution level drops. • Solution temperature may be set in the range 20°C to 80°C in 1°C increments. • Controller automatically selects last-used settings at switch on. • 4-keypad membrane control panel is easy to use. • LEDs show the status of power, heater and sonics. guyson.co.uk Modifications and improvements to Guyson machines are introduced from time to time as a direct result of our policy of continuous development. Consequently all designs and specifications quoted must be regarded as subject to change. Please refer to quotation. Ref: UCR Ultrasonic Tanks Guyson International Ltd. Tel: 01756 799911

Open the catalog to page 1

All GUYSON catalogs and technical brochures

  1. Formula 1600

    1 Pages

  2. Formula 1200

    1 Pages

  3. Formula 1400

    1 Pages

  4. Orbit

    4 Pages

  5. KS4000 MK3

    1 Pages

  6. Microsolve

    4 Pages

  7. CRD450

    1 Pages

  8. KS1500

    1 Pages

  9. KS525

    1 Pages

  10. Euroblast GL

    1 Pages

  11. Mediblast

    1 Pages

  12. Shot Peening

    4 Pages