SY110 LOW DENSITY SYNTACTIC CORE ¬ Lightweight drapeable core material Co-curable with all Gurit Prepregs & SPRINT™ Produces ultra-light and stiff panels Wide process window; curing from 85-130ºC (185-266ºF) Fast lay-up times Typical Sandwich Panel using prepreg and SY110

CURING SCHEDULE CURE ENVELOPE It is important to take care unrolling the material to avoid wrinkling or creasing the product. Do not leave the rolls lying flat on a bench/floor or box, as this will flatten one side of the product roll. SY110 has a relatively flexible cure envelop. The minimum cure is 85ºC (185ºF) for 10 hours and a quick cure is 130ºC (266ºF) for 30 minutes. 1. Place the SY110 into the laminate lay-up as desired; it is usual for both faces of the SY110 to be covered with a prepreg or SPRINT™ material to form an in-situ sandwich construction. SY110 will co-cure with other Gurit...

LAMINATE PROPERTIES CURED LAMINATE PROPERTIES When used in conjunction with single sided SPRINT™. Cured using standard processing techniques and a minimum cure time of 10 hours at 85⁰C (185°F). SYMBOL 198gsm HS-3k 2x2 twill woven carbon 300gsm HS-6k 2x2 twill woven carbon 580gsm 2x2 twill woven E glass 580gsm 2x2 twill woven E glass TEST STANDARD 198gsm HS-3k 2x2 twill woven carbon 300gsm HS-6k 2x2 twill woven carbon Cured Weight Cure Method Cure Schedule Poissons Ration Shear Modulus Temperature Performance Equivalent steel thickness / weight saving Equivalent aluminium thickness / weight...

All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure that they...