Catalogs >
Gurit >
SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1)

SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1)
4Pages

Catalog excerpts

SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1) - 1

SE 160 160°C TG STRUCTURAL EPOXY PREPREG ¬ Excellent handling, drape and mould conformance High quality, low void content laminates Fast lay-up times Excellent mechanical performance Fast, flexible curing options Excellent shelf-life – at least 8 weeks at 21°C (70°F) INTRODUCTION Gurit’s innovative 160°C Tg prepreg range uses a high flow, low tack epoxy prepreg. SE 160 prepreg technology can be cured using compression moulding, vacuum bag or autoclave processing and offers a flexible cure envelope of just 15 minutes at 165°C (329°F). This unique product provides technically and commercially competitive engineering materials, ideal for use either solely, or in conjunction with other Gurit products from within the range.

Open the catalog to page 1

SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1) - 2

PRODUCT INFORMATION SE 160 carbon prepreg is available in a range of product formats. Please consult your local sales contact for further information. Full contact details can be found at www.gurit.com. PREPREG PROPERTIES RHEOLOGY DATA TRANSPORT & STORAGE SE 160 resin viscosity profile conducted at 1°C (2°F)/ minute. When stored sealed & out of direct sunlight. Minimum Viscosity STORAGE TEMP Temperature at Minimum Viscosity All prepreg materials should be stored in a freezer when not in use to maximise their useable life, since the low temperature reduces the reaction of resin and...

Open the catalog to page 2

SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1) - 3

LAMINATE PROPERTIES CURED RESIN PROPERTIES 4mm resin cast oven cured using standard processing techniques and standard cure of 30 minutes at 160°C (320°F) PROPERTY TEST STANDARD Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Compressive Strength WOVEN LAMINATE PROPERTIES Cured using standard processing techniques and a minimum cure time of 15 minutes at 165⁰C (329°F). PROPERTY TEST STANDARD Fabric / Fibre Description 245g/m2 2x2 twill fabric using T300 3k fibre Resin Content Cure Method Cure Schedule Glass Transition Temperature (DMA) 0° Tensile Cured Fibre Volume* 0°...

Open the catalog to page 3

SE 160 - 160°C TG STRUCTURAL EPOXY PREPREG (v1) - 4

All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure that...

Open the catalog to page 4