MPS U V C u r i n g C o m p o s i t e Te c h n o l o g y Multi-purpose System NEW: UV curing resin system for Turbine Blade repair. Fast curing single component resin developed to work even in low temperatures, saving time, effort and waste in all repair formats. n UV Curing resin system with dedicated RENUVO™ Lamp Technology n Summer grade material for use at +15OC to +30OC n Winter grade material for use at +5OC to +18OC n Compatible with current topcoat solutions n Mono-component resin technology n Thicknesses up to 3mm for single cure operation n Clean processing avoiding mixing and contamination n GL Certified product range n User friendly 310ml cartridge format Introduction RENUVO™ Multi-Purpose System (MPS), is a breakthrough UV curing resin system, developed by Gurit as a repair system for turbine blades. The system can be used either as a stand alone spot repair or in combination with RENUVO™ Prepreg for a structural repair. RENUVO™ MPS offers a step change in materials for the repair market. With working temperatures as low as +5OC, MPS has demonstrated a practical solution to an engineering problem, how to perform repairs quickly at these temperatures. For this reason, 2 specific grades of material have been formulated to give the operator the right material for both hot and cold environments. The Mono-component RENUVO™ MPS resin eliminates the human error of mixing, dispensing and working with traditional 2 component repair systems. Additionally the material offers the operator the security that wherever the material has been sourced it is the same product manufactured to the same high exacting process. Using a dedicated UV source, ideally RENUVO™ Lamp Technology, RENUVO™ MPS is cured in 90 seconds for a simple spot filler type repair, up to 3mm thickness. Used in combination with RENUVO™ Prepreg the MPS product acts as the perfect primer to give the perfect air free bond surface. PDSWE-RENUVO MPS-4-0911 1

* Please refer to RENUVO™ Lamp datasheet for more info Product should be protected from any UV exposure in order to maximise shelf-life The product should be applied out of direct sunlight to extend the working time. Please refer to the RENUVO™ Blade Repair Solution process notes. Please refer to product MSDS and ensure that appropriate UV protection is used when curing material. Winter Grade +5 to +is°c/ +4I°F to +64°F * Please refer to RENUVO™ Lamp datasheet for more info Product should be protected from any UV exposure in order to maximise shelf-life The product should be applied out of direct...

Transport & Storage The RENUVO™ MPS cartridges and caps should be kept securely closed during transport and storage. Adequate long-term storage conditions will result in a shelf life of 1 year at 21°C. Storage should be in a dry place out of direct sunlight, ambient light and protected from frost. The long-term storage temperature should be between 10°C and 25°C, the product may however be stored between +5°C and 30°C prior to application. It is recommended that cartridges are stored in their original box to protect the cartridges from ambient UV light. Notice All advice, instruction or recommendation...