PRODUCT INFORMATION : LAMINATING AND INFUSION SYSTEMS DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS LAMINATING AND INFUSION SYSTEMS [email protected] www.gurit.com

GURIT’S RANGE OF LAMINATING AND INFUSION SYSTEMS Gurit pioneered the use of epoxy resin in the manufacture of large light weight, high stress composite structures, Essentials - Readily available recommended products by formulating low viscosity systems with long working times before gelation. These systems allowed the use Specialist - Application specific products available on request of vacuum bagging techniques to be used which, in turn, improved the mechanical properties of the finished item by obtaining highly favourable fibre to resin ratios. This reduced void numbers and sizes and improved...

AMPREG 21 Epoxy Wet Laminating System Up to 14 hours working time Simple mix ratio (volume) PRIMETM 20LV Epoxy Infusion System Up to 14 hours working time ¬ Low initial mixed viscosity ¬ Excellent Fibre Wetting ¬ Variable infusion times ¬ Good cure progression from ambient only cures ¬ Germanischer Lloyd approved ¬ Very low exotherm even in thick sections ¬ Germanischer Lloyd & Lloyds approved ¬ Non Pigmented Resin and Hardeners ¬ Improved Health and Safety INTRODUCTION Ampreg 21 is the latest generation of laminating systems offered by Gurit. The low initial mixed viscosity makes this product...

TECHNICAL INFORMATION AND PRICING For more detailed information on Laminating Systems, as well as the complete Gurit product portfolio, please visit: www.gurit.com to view the following -i Product Data Sheets -■ 'How to1 Videos -i News / Case Studies -■ Composite Guides -i Events Schedules -■ Representatives Contact Details -i Product Brochures -■ Corporate Videos For pricing or other enquiries, please contact [email protected] About News Products & Matarials Systems & Engineering Markers Invcsto- Relations Careers Contact DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS Guritisa global leader in...