Gunnebo SpeedStile FLs DS Series
6Pages

{{requestButtons}}

Catalog excerpts

Gunnebo SpeedStile FLs DS Series - 1

Flap Leaf Speed Gate for Internal Installation

Open the catalog to page 1
Gunnebo SpeedStile FLs DS Series - 2

Flap Leaf Speed Gate for Internal Installation Mode of Operation Flap Leaves Motorised flap leaves Architects and Interior Designers have always been at the forefront in introducing new materials. Gunnebo embraces this philosophy in the SpeedStile DS series with exciting new materials, selection of finishes and lighting effects. Finishes and ergonomic shapes that capture the designer’s imagination. A new stylish and flexible design able to virtually blend infinite aesthetics within architectural interior needs, still including security features and performances from Gunnebo experience....

Open the catalog to page 2
Gunnebo SpeedStile FLs DS Series - 3

Safety Features Safety force sensing Safety light curtain (option) Accurate presence sensing Finishes DS series includes applied Grey Aluminium for the elliptic top lid with stainless steel effect centre strip, chassis, plinth and end leg posts finishing in 304 grade stainless steel and glass inlay 10mm thick. Emitter/receiver infrared sensors technology Logic voltage 24V dc Voltage free contact input for Fire Alarm fail state Manual push opening on power off Anti-panic push opening in operation Wide walkway for wheel chair or easier access Accompanied wheelchair or child passage management...

Open the catalog to page 3
Gunnebo SpeedStile FLs DS Series - 4

1. 115Vac 60Hz also available on demand. 2. Note: Average background noise in office environment is 50

Open the catalog to page 4
Gunnebo SpeedStile FLs DS Series - 5

Dimensions & Weights ABC Weight (kg) Weight (kg) Overall Height Passage Width Cabinet Height Cabinet Length Cabinet Width1 Side Cabinet Centre Cabinet Standard short lane Dimensions in (mm). Weight net (kg). Might require lifting equipment. For details refer to installation detail drawings. 1. Add 65mm for side cabinet or 130mm for centre cabinet due to column rotor. 1. Bolting depth MIN 70mm, concrete MIN fckcube 30N/mm2 resistance, MIN 2000 x 400 x 150 mm deep. 2. Running MIN 140 mm below finished floor level, should rise MIN 50mm from foundation. 3. Mean time to repair. 4. Mean cycle...

Open the catalog to page 5
Gunnebo SpeedStile FLs DS Series - 6

Take advantage of our knowledge: www.gunnebo.com/Entrance-Control Design and production: Gunnebo. Photos Credits: Gunnebo. The data given in this material may be subject to change without further notice. The Gunnebo logos and “Gunnebo – For a safer world” are registered trademarks of Gunnebo AB. SpeedStile_FLs_DS.series_2.3_EN Gunnebo SpeedStil

Open the catalog to page 6

All Gunnebo catalogs and technical brochures

  1. SlimStile BA

    5 Pages

  2. SPEEDSTILE

    12 Pages

  3. EV Series

    6 Pages

  4. PasSec

    6 Pages

  5. SARGASSO

    2 Pages

  6. Rhino Mk II

    2 Pages

  7. PRIMUS

    2 Pages

  8. EVOLVE

    8 Pages

  9. BlasTek A

    4 Pages

  10. Diva

    4 Pages

  11. DataGuard

    2 Pages

  12. Hestia

    4 Pages

  13. SPEEDSTILE

    12 Pages

  14. Case Study

    2 Pages

  15. Gates

    12 Pages

  16. GSL 1000

    2 Pages

  17. Turnstile

    8 Pages

  18. Automation

    20 Pages

  19. Centurion

    2 Pages

  20. MultiDoc

    2 Pages

  21. DuoGuard

    2 Pages

  22. Optema

    4 Pages

  23. Module Guard

    2 Pages

  24. Citadem

    4 Pages

  25. SafeBag MI6

    2 Pages

  26. SafeCashR4

    2 Pages

  27. Carena

    4 Pages

Archived catalogs

  1. SafeCoinD500

    2 Pages

  2. SafeCoinD

    2 Pages