Gunnebo Pass-O-Mat Entrance Gate Entrance Gate for internal Installation The Gunnebo Pass-O-Mat Entrance Gate is a unidirectional motorised swing gate originaly designed for access control and customer guidance in retail outlets. It is also a valuable and cost-effective entrance solution used for disabled and trolley access or exists in security installations alongside tripod turnstiles or other products. The Pass-O-Mat Entrance Gate is equipped with an antipanic device: pushing over a due force (approximately over 110N) the swing gate disengages to create a free exit in both directions. It is available in Right Hand, Left Hand or Double configurations available with standard arm length or extra arm length of 1200mm as an option. The Pass-O-Mat Entrance Gate also includes a push button control for operating the unit and by default is provided with white infill with arrow sign on the opening side and no-entry sign on the opposite side. Other signage options are also available. Made of stainless 304 grinding finish (POM C0 version only available) the Pass-O-Mat provides the same Gunnebo finishing casework as the Gunnebo tripod providing a perfect match. Normally closed, opens upon a signal and closes again after an adjustable period (0 to 15 sec).

Technical Specifications • Left Hand • Right Hand Casework: Stainless Steel AISI 304 (1.4301 as for EN10088-1), Scotch-Brite™ finished Swing arms: Anodised aluminium Green arrow adhesive* The motor and mechanism is housed in the central casework The swing arm is moved by a 230Vac motor coupled with a mechanism equipped with an anti-panic device that enables the manual opening over a calibrated force applied at (110N) All models are equipped with a belt transmission system that decouples the arm from the mechanism when it encounters an obstacle. disabled access adhesive* *to be placed on white...

Site Preparation Product delivered fully assembled and may require lifting equipment. Approx. weight: 25kg (Left or Right Hand). (For installation details, please refer to the proper installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/- 5mm over footprint area. Dimensions to be > 700 x 500 x 150 deep min (units in mm). Important: Any horizontal pipe or conduit running below the Pass-O-Mat Entrance Gate must be at least 140mm below FFL. Metal conduit for cables should be raised at least 50mm from foundation It is the...

Take advantage of our knowledge: www.gunnebo.com/Entrance-Control Design and production: Gunnebo. Photos Credits: Gunnebo. The data given in this material may be subject to change without further notice. The Gunnebo logos and “Gunnebo – For a safer world” are registered trademarks of Gunnebo AB. Gunnebo Pass-O-Mat Entrance