Flap Leaf Speed Gate for Internal Installation

Flap Leaf Speed Gate for Internal Installation Mode of Operation Flap Leaves Motorised flap leaves Minimal footprint, transparent and user-friendly design for all users, for sites where limited space is required and aesthetics is important. Quiet and smooth in operation, the SpeedStile FLs EV has rounded end claddings integrating blue or white LEDs to illuminate the cabinet glass, with rounded lids. Available in a selection of cabinet lengths, flap leaf widths, flap leaf heights up to 1800mm, top lid materials, finishes and options. One-leaf service-gate solution for extra wide service passage,...

Safety Features Safety force sensing Finishes Chassis, plinth, end cladding and rotor column finishing in 304 grade stainless steel and glass inlay 10mm thick. Lower safety sensors (option) Standard finish for lid: Black technopolymer Accurate presence sensing Emitter/receiver infrared sensors technology Blue or white LEDs integrated into end cladding illuminate cabinet glass and column. Logic voltage 24 V dc Voltage free contact input for Fire Alarm fail state Manual push opening on power off Anti-panic push opening in operation Wide walkway for wheelchair or easier access Accompanied wheelchair...

Options & Accessories Alternative finishes and materials Remote control systems Lower safety sensor kit Clear acrylic wings Card reader integration One-Leaf Service Gate version to pair with adjacent FLs lanes Access Specifications Flow rates by type of reader1 Insertion type Swipe type Proximity type Accessibility for Standard (600mm) vs. Wide (900mm) models Plain dot indicates the functionality is implemented, empty dot indicates some limitations, no dot indicates not available. Emergency egress2 functionality implemented as standard. 600mm 900mm Disabled Access: 900mm net passage way and algorithm...

Dimensions & Weights Glass leaves Overall Height Passage Width Weight (kg) Side Cabinet Weight (kg) Centre Cabinet Dimensions in (mm). Weight net (kg). Might require lifting equipment. For details refer to installation detail drawings. 1. Add 65mm for side cabinet or 130mm for centre cabinet due to column rotor Installation & Maintenance Product Delivery Control Board Location Maintenance Access Preassembled or kit form as option Flat & level finished floor +/- 5mm Into rotor column Settings programmable via parameters Drive column and lid access Less than 30 minutes 1. Bolting depth MIN 70mm,...

Take advantage of our knowledge: www.gunneboentrancecontrol.com Design and production: Gunnebo. Photos Credits: Gunnebo. The data given in this material may be subject to change without further notice. The Gunnebo logos and “Gunnebo – For a safer world” are registered trademarks of Gunnebo AB. SpeedStile_FLs_BA_EV_2.3_EN Gunnebo SpeedStil