Website:
Gullco International Limited
Catalog excerpts
welding and cutting automation trackless welding carriage - moggy® Ideal for automatic horizontal fillet, lap or butt welding applications Control allows for continuous or stitch welding operations Dual gun holder assemblies make automated simultaneous welding effecient MOGGY® wheels can be inverted to allow carriage to operate on v-groove track The MOGGY® can be equipped with a variety of accessories including: weld oscillator, cutting torch attachment and internal radius guide wheels GM-03-100 - STANDARD CARRIAGE gm-03-200 - Dual torch CARRIAGE Automate Fillet, Lap, and Butt Welds with Precision VERSITILE TRACKLESS AUTOMATION CARRIAGE FOR A VARIETY OF APPLICATONS
Open the catalog to page 1
Trackless automation welding carriage FILLET JOINT WELDING The MOGGY® performing a fillet weld using a template, guide or fence positioned parallel to the workpiece. The actual workpiece is often used as the guide. The MOGGY® is performing a lap joint weld. It is guided by Industry Standard 6” (152.4mm) v-groove track running parallel to the joint. Precise Torch Alignment To The Seam Adjustable guide rolls mounted on the front or back of the carriage monitor the slightest seam variations following straight or curved surfaces...maintaining optimum torch positioning as the carriage travels....
Open the catalog to page 2
BUTT JOINT WELDING The MOGGY® is ideal for butt joint welding. Here the MOGGY® is using a fence to guide it accurately along the desired path. Standard v- groove track can also be used. Dual gun holder assembly mounted on the MOGGY® enables positioning of two guns and simultaneous activation of two wire feed signals. MOGGY® is guided by the workpiece. JOINT TRACKING Adjustable height guide roller assemblies are available to track joints with a vertical member higher or lower than the set height of guide roller wheels. RADIAL OSCILLATOR Replaces the standard gun holder assembly in order to...
Open the catalog to page 3
Speed Range: 5.8 - 115.178 in/min (14.6 -292.552 cm/min). *Special speed range of 3 - 54 in/min (7.6 - 137 cm/min) is also available as a special request. Maximum Incline: 30° Gun Positioning Slides: 1-3/4” (44.5 mm) Vertical and Horizontal Stroke Weight of MOGGY®: 31 lbs. (14.1 kg) complete with all attachments (single gun model) Supply Voltage: Either 42, 115, or 230 VAC, single phase, 50/60 Hz., 30 watts Drive Motor: 24 VDC permanent magnet gear motor Drive Wheel Temp Range: -65°F to 450°F (-54°C to 232°C) Complies with: C.S.A. & N.R.T.L. (file #LR35006-8) & C.E. Certification. KAT, KBM,...
Open the catalog to page 4All Gullco International Limited catalogs and technical brochures
-
KAT® 300 SERIES2 Pages
-
KATBAK® Ceramic Weld Backing3 Pages
-
GK-2002 Pages
-
GOV 100 FH - 1002 Pages
-
Pipe KAT- Rigid Band4 Pages
-
Pipe KAT - Operation56 Pages
-
KAT® Rigid Track Carriage4 Pages
-
GK-1921 Pages
-
rigid kat1 Pages
-
Customized Welding Gantry4 Pages
-
Vacuum Track Mounting System4 Pages
-
Welding Positioner4 Pages
-
Cutting Carriage - KAT II2 Pages
-
Auto-Weld Carriage System2 Pages
-
Automatic Overlay Welder2 Pages
