Catalogs >
Gullco International Limited >
Pipe KAT® - Pipe Welding Carriage - Rigid Tr

Pipe KAT® - Pipe Welding Carriage - Rigid Tr
4Pages

Catalog excerpts

Pipe KAT® - Pipe Welding Carriage - Rigid Tr - 1

welding and cutting automation ORBITAL WELDiNG CARRiAGE - PiPE KAT® - RiGiD TRACK Carriage Features and Benefits Include: • Linear or Radial Oscillation • Remote Voltage Adjustment • Motorized Width Adjustment • High Deposition Rate • Simple Setup • Easy to Use Controls • Gas or Water Cooled Models • Upto 2.5” (6.35 cm) Oscillation Width PK-500-LG/RG - GAS/AiR COOLED PK-500-LW/RW - wATER cOOLED Self Contained Orbital Welding System AUTOMATE AND IMPROVE PIPE WELDING AND ORBITAL WELDING APPLICATIONS

Open the catalog to page 1

Pipe KAT® - Pipe Welding Carriage - Rigid Tr - 2

The Pipe KAT® is a pipe welding carriage designed for orbital welding. It is an electrically powered track guided carriage that operates in the forward or reverse directions at precisely controlled speeds. The carriage operates on a track band made of durable aluminum extrusion by engaging the track with self-aligning wheels and a rack and pinion drive. This wheel assembly uses a lever to engage that track making it very quick and simple to install the carriage. SPECIFICATIONS: Carriage Weight: 48 lbs (21 kg) Control Box Weight: 30 lbs (13.6 kg) Power Requirements: 42, VAC, 115 VAC, 230...

Open the catalog to page 2

Pipe KAT® - Pipe Welding Carriage - Rigid Tr - 3

CARRIAGE CONTROL LAYOUT CARRIAGE CONTROL REMOTE HAND PENDANT CARRIAGE WELD SPEED TRIM OVERRIDE WELDING VOLTAGE CONTROL WIRE FEED SPEED TRIM OVVERIDE WELD ENABLED/ DISABLED OSCILLATION WIDTH ADJUSTMENT EMERGENCY STOP OSCILLATOR CENTER POSITIONER ADJUSTMENT AUTO CYCLE STOP PUSH BUTTON AUTO CYCLE START PUSH BUTTON The Remote pendant (left) is used in conjunction with the main control (right) to provide adjustment during setup, initiate the weld cycle, provide fine adjustment during welding, and to stop the weld cycle. The remote pendant is supplied with a 35ft communication cable that connects...

Open the catalog to page 3

Pipe KAT® - Pipe Welding Carriage - Rigid Tr - 4

PK-500-LG/RG For use with gas/air cooled welding torch necks and consumables. Additional items are required. BINZEL Air Cooled PP 36 D -Torch Uses MB 36 Consumables (See Drawing PK-200-270-03) BERNARD Air Cooled Uses Large Centerfire, HD Centerfire Consumables (See Drawing PK-200-270-05) BERNARD Air Cooled Uses Small Centerfire Consumables (See Drawing PK-200-270-06) TERGASKISS Air Cooled Uses Tough Lock & Conventional Tip Consumables (See Drawing PK-200-270-07) PK-500-LW/RW For use with water cooled welding torch necks and consumables. Additional items are required. BINZEL Water Cooled PP...

Open the catalog to page 4