Catalogs >
Gullco International Limited >
KAT®100 SERIES AUTOMATION CARRIAGE

KAT®100 SERIES AUTOMATION CARRIAGE
2Pages

Catalog excerpts

GK-165-068 - CUTTING TORCH HOLDER Accepts standard 1 3/8” (35 mm) cutting torches with 32 pitch rack. Supplied with calibrated angle of tilt scale and 1 1/8” (29 mm) or 1 1/2” (38 mm) square clamp. GK-165-068 Accepts 1.280” (32.50mm) cutting torches. Supplied with calibrated angle of title scale as above. ON/OFF GAS FLOW TOGGLE VALVE - GK-010-031-TV On/Off toggle valve for use with acetelyne torches. GK-171-047-2 - RACK ARM - 18” (457.2 mm) long 1-1/8” (29 mm) Square Rack Arm with rack and one ends turned to 1-1/8” (29 mm) diameter. GK-171-650 - HEAVY DUTY RACK BOX 10” (254 mm) long with adjustable nylastic bearing plugs for 1 1/8” (29 mm) square rack arm. WELDING AND CUTTING AUTOMATION HS KAT®100 SERIES AUTOMATION CARRIAGE RIGID TRACK SECTIONS For use with the Gullco KAT® Travel Carriage Model GK-200 in most portable applications. Standard track sections are supplied in 48, 96 and 120 inch (1219, 2438 and 3048 mm) lengths complete with rack and interlocking ends. ON/OFF MAGNET ASSEMBLIES - GK-165-215 feature two powerful magnets each with 150 lbs (45 kg.) of holding power and on/off knob for easy installation. GK-165-074-2 - 4 MOTION SEMI-AUTO TORCH HOLDER Mounts on the KAT® horizontal rack arm to provide 5” (127 mm) of vertical adjustment and 360° torch rotation & two directonal angle tilt. GK-184-200 CIRCLE CUTTING ACCESSORY Undercarriage: equipped with gear assembly that is engaged and driven by carriage gear system. This also includes a clutch that allows free-wheeling during set-up. Radius arm- 36” long with slide/lock for diameter size adjustment. Magnet/Holder for centering pin. (not shown in cover photo). The GULLCO® KAT®100 automation carriage is the major component of an automated system designed to improve welding and cutting applications by increasing quality and reducing the cost of operations by increasing productivity. Operator safety is greatly enhanced by the use of GULLCO® low voltage (24 VDC) control and switch mode power supply integration.The carriage consists of a low voltage 24 VDC permanent magnet gear motor which engages the track through a set of spur gears. An easy to engage clutch lever permits freewheeling of the carriage for rapid positioning. The carriage is designed to run on rigid KAT® track to provide stable consistent results. KAT®100 series carriages come in 2 models to automate both welding and cutting applications along with a variety of accessories to help improve efficiency including torch positioning and movement as well as arc start integration. The simplest in the series of KAT® mechanized automation. The 100 is designed to be an entry level carriage with simple setup, minimal control complexity and quickly integrates into a variety of welding and cutting applications. INCREASE PRODUCTIVITY AND PRECISION ALL POSITION WELDING AND CUTTINGCARRIAGE KAT, KBM, MOGGY, KATBAK & SAM are registered trademarks of Gullco Enterprises Limiited SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE gullco international limited - Canada Phone: 905-953-4140 Fax: 905-953-4138 e-mail: sales@gullco.com gullco international inc. - u.s.a Phone: 440-439-8333 Fax: 440-439-3634 e-mail: ussales@gullco.com gullco international (u.k.) limited- Europe Phone: +44 1257-253579 Fax: +44 1257-254629 e-mail: sales@gullco.co.uk gullco international pty limited - Australia Phone: 61 (0)7 3348 5515 Fax: 61 (0)7 3348 5510 e-mail: ausales@gullco.com gullco international india pvt limited - india Phone: 91-20-65260382 Fax: 91-20-26836656 e-mail: india.lo@gullco.com gullco international shanghai limited- china Phone: +8621-50460341 Fax: +8621-50463554 e-mail: gsuntech@sh163.net gullco international limited- latin America Phone: 55-11-9485-1336 e-mail: rogerio.macedo@gullco.com Stuch GmbH & Co. KG Scweisstechnik - GERMANY Phone: (02 03) 72 94 95 Fax: (02 03) 72 94 96 e-mail: info@stuch-schweisstechnik.de

Open the catalog to page 1

SPECIFICATIONS Speed Range: 1 - 85.5 in/min [2.5 - 217.2 cm/min] No Load Horizontal 2 - 72 in/min [5.1 -182.9 cm/min] Full Load Vertical Weight of Carriage: 13.2 lbs. [6 kg] Vertical Load Capacity: 50 lbs. [23 kg] Motor: 24 VDC permanent magnet gear motor Supply Voltage: 85 to 264 VAC, single phase, 50/60 Hz. Complies with: CE Certification KAT®100 WELDING AUTOMATION CARRIAGE - GK-100-WKAT®100 WELDING CUTTING CARRIAGE - GK-100-FC Speed Adjustment Counter-C ockwise = S ower Command Forward Motion Control in Hold (Stop) Mode" Command Reverse Motion The GK-100-W carriage is equipped with 2...

Open the catalog to page 2

KAT®100 SERIES AUTOMATION CARRIAGE 2Pages

Catalog excerpts

All Gullco International Limited catalogs and technical brochures

KAT®100 SERIES AUTOMATION CARRIAGE
2Pages