Catalogs >
Gullco International Limited >
electronic seam tracking system - KAT®

electronic seam tracking system - KAT®
1 / 4Pages

Catalog excerpts

electronic seam tracking system - KAT® - 1

welding and cutting automation electronic seam tracking system - KAT® * Carriage sold separately A high precision tracking system that maintains the torch in optimum operating position regardless of variations in the weld seam. This provides improved quality and efficiency in a wide variety of welding operations. High Precision Weld Tracking System MAINTAIN THE TORCH IN OPTIMUM OPERATING POSITION TO PRODUCE THE HIGHEST QUALITY WELDS

Open the catalog to page 1

electronic seam tracking system - KAT® - 2

The quality and efficiency achieved with today’s automated welding systems can be impaired by material warpage, misalignment, irregular edge fit-up, different material thickness and other conditions that cause variations in the weld seam. Gullco KAT® Trackers restore optimum performance when these conditions are encountered. They continually sense the slightest variation across the weld seam and automatically correct the position of the weld torch. The trackers are designed for incorporation and use with the Gullco KAT® travel carriage system but can readily be used with other travelling...

Open the catalog to page 2

electronic seam tracking system - KAT® - 3

...incorporating sensing modes that cover virtual all tracking gullco model WSG-1200 kat® tracker requirements SYSTEM SYSTEM COMPONENTS M Main Control Box, Pendant Remote Control Box, Probe, Probe Micro Cross-Slide, Motorized CrossSlide Assembly, Probe-To-Torch Mounting Bracket, Control Cables from Probe and Cross-Slide to Main Control Box, Torch Holder with vertical/ horizontal adjustment, Brackets for mounting Cross-Slide and Main Control Box on KAT® Travel Carriage. MAIN CONTROL BOX Incorporates main power switch, On/Off pilot light, signal lights indicating sensing function...

Open the catalog to page 3

electronic seam tracking system - KAT® - 4

Gullco Mechanical Seam Trackers and Height Sensors are designed for use with the Gullco KAT® Travel Carriage to accurately maintain the required, pre-set distance between the gun or torch and the workpiece in automated welding and cutting operations. Three models are available to effectively meet various application needs. All are constant velocity, spring-type sensors utilizing hardened and ground slide bars with recirculator ball bushings to provide 1-3/4” (44mm) of torch float.* Model GK-190-600 Height Sensor has an adjustable swivel copper guide wheel to contact the work surface. Model...

Open the catalog to page 4