Catalogs >
Gullco International Limited >
ARCAIR-MATIC N7500 GOUGING SYSTEM

ARCAIR-MATIC N7500 GOUGING SYSTEM
2Pages

Catalog excerpts

WELDING AND CUTTING AUTOMATION KAT® Rigid Track Carriage - GK-200-RH•-N KAT® Flexible Track Carriage - GK-200-FH•-N Heavy-duty self-aligning wheel assemblies, closed loop tack feed-back for accurate speed control when running in any plane, regardless of load. (Maximum 100 lbs.) (45 kgs). The carriage is controlled by the Gullco low voltage 24 volt GSP microprocessor pulse width modulation motor control, interfacing with the forward/stop/reverse switch and infinitely variable 4-turn speed potentiometer. The LED display is in IPM or cm/min. The motor control can be upgraded to provide auto forward/reverse, limit switches and auto wire feed start. ARCAIR-MATIC N7500 GOUGING SYSTEM 6” (152.4 mm) long with adjustable nylastic bearing plugs, for 1-1/8” (29 mm) square rack arm. The Arcair-Matic® N7500 gouging system is highly productive for any metal fabrication operation where gouging and welding represents a large portion of the work schedule. This applies to almost all metals, including stainless steel, carbon, manganese, and chrome-moly steels. Rack Box Riser Bracket - GK-190-066 Provides an adjustable mounting surface – 2” (50.8 mm), 4” (101.6 mm) or 6” (152.4 mm) above the normal KAT® Carriage Rack Box mounting surface. System complete with mounting screws and can accommodate both rack boxes. Models GK-171-650 heavy duty 1-1/8” (29 mm) and GK-190-650 extra heavy duty 1-1/2” (38 mm). 18” (457.2 mm) long heavy duty 1-1/8” (29 mm) Square Rack Arm - GK-171-047-2 With rack and both ends turned to 1-1/8” (29 mm) diameter. All functions can be controlled, from determining gouge parameters, start/stop function, travel delay, and the capability to manually feed or retract the electrode in the Torch Head. The operator can view the amperage and voltage during gouging sequence easily while maintaining the electrode on the weld seam that’s being back gouged. GK-200-023 Adaptor Stud Assembly - Consists of the below Heavy-Duty Rack Box - GK-171-686 4” (101.6 mm) long with adjustable nylastic bearing plugs, for 1-1/8” (29 mm) square rack arm, with 3/8” threaded stud with 1-1/8” (29 mm) swivel clamp. 10-1/4” (260.3 mm) long 1-1/8” (29 mm) Square Rack Arm - GK-171-047-10.25 With rack and one ends turned to 1-1/8” (29 mm) diameter. Gouging Torch Adaptor Stud Attachment - GK-200-017 The adaptor stud is used to facility the mounting of the gouging head to the rack arm. A single electrode contact shoe assembly accepts a full range of jointed electrodes from 5/16” (7.9 mm) through 3/4” (19.1 mm). The block holds the adaptor stud and attaches to the rack arm for adjustment of the gouging head Optional Accessories Rigid Track Idler Carriage - GK-200-022 Flexible Track Idler Carriage - GK-200-F-022 Complete with heavy duty self-aligning wheel assemblies providing 8-3/4” x 14-7/8” (222 mm x 378 mm) flat surface for mounting equipment and can be towed behind a KAT® Travel Carriage. (complete with a towing kit). KAT, KBM, MOGGY, KATBAK & SAM are registered trademarks of Gullco Enterprises Limiited Five Times Faster, Ten Times Less Grinding INSURE QUALITY AND CONSISTENCY WITH PRE-SELECTED GROOVE DEPTH SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Open the catalog to page 1

Arcair®, an industry leader in air carbon-arc products, introduces the Designed to operate on rigid or flexible Provides precise control of the application parameters that provides versatility, flexibility L.E.D Display for easy visibilty of the application parameters during operation enhanced gouging function. Combined Can be adapted for both Welding and Cutting applications further improvments to productivity, improved automatic gouging system Includes Remote Pendant, Control Box and Torch Head (Part No. 65-991-015) and safety features built with an with the KAT® Automated Carriage...

Open the catalog to page 2

ARCAIR-MATIC N7500 GOUGING SYSTEM 2Pages

Catalog excerpts

All Gullco International Limited catalogs and technical brochures

ARCAIR-MATIC N7500 GOUGING SYSTEM
2Pages