*mydirectindustry

Catalogs
Güralp Vinc ve Makina Konstrüksiyon San. ve Tic. A.S.
Wire rope hoist

Wire rope hoist

Product catalog summary

Technical Specifications Summary for Lifting Equipment

1. Capacity and Working Class

The document provides detailed capacity ratings for lifting equipment ranging from 1000 kg up to 100,000 kg. Capacities are grouped in increments such as 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6300, 8000, 10,000, 12,500, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 63,000, and 80,000 kg.

Each capacity is associated with a Working Class according to FEM/ISO standards, typically ranging from M3 to M6 classes, indicating the durability and duty cycle of the equipment.

2. Lifting Height and Reeving

Lifting heights vary by capacity and model, with common heights listed as 2.5 m, 5 m, 7.5 m, 8 m, 10 m, 12 m, 15 m, 16 m, 18 m, 20 m, 22 m, 24 m, 30 m, 32 m, and 36 m. Reeving configurations are specified, such as 2m/M5, 3m/M6, 1Am/M4, and 1Bm/M3, indicating rope diameter and reeving system type, which affect lifting performance and safety.

3. Working Speeds

Lifting Speed: Ranges typically from 0.4 m/min up to 1.6 m/min depending on capacity and reeving.
Cross Travel Speed: Common speeds include 6, 8, 10, 12, 15 m/min, with options for higher speeds on request.
Options: Additional speed options are provided, such as 1, 2, 4, and 6 m/min for lifting and cross travel, allowing customization based on operational needs.

4. System and Model References

The document references various system codes and models such as M880, Wave, and WAVE2, which likely correspond to product lines or control systems for the lifting equipment.

5. Additional Notes

SWP (Safe Working Period) is mentioned with a load of 100,000 and a time frame of 1 week, indicating testing or operational limits.
VFD (Variable Frequency Drive) is noted, suggesting the use of variable speed drives for motor control.
Some entries include placeholders or codes (e.g., 0.0.0.0.0.0), possibly for internal tracking or versioning.

Critical Information and Best Practices

Ensure selection of lifting equipment matches the required capacity and working class for the intended application to guarantee safety and longevity.
Choose appropriate reeving and lifting height configurations to optimize performance and comply with operational constraints.
Consider available speed options for lifting and cross travel to meet process efficiency and safety requirements.
Verify system compatibility with referenced models and control systems (e.g., Wave, WAVE2) for integration and maintenance.
Adhere to FEM/ISO standards as specified to maintain compliance and ensure equipment reliability.

This summary consolidates the key technical parameters and options for lifting equipment capacities, speeds, and configurations as presented in the document.

Catalog excerpts

Guralp is the first R&D centre in Turkeys overhead crane industry With Branches on 3 continents and service providers, worldwide our world class production facility now presents the all new GURALP Hoist selection catalogue with new and exciting options...

Open the catalog to page 3

Constant load control with PLC cut - off* Reliable operation • Load display option • Trolley Group Specifically designed for Crane applications. • Direct drive technology in all double rail trolleys • Helical gears with high safety factor • Smooth starting and braking with frequency inverter control • Compact construction with minimal hook approach • • Pre-switching for slowdown and limit switching for stopping in both directions for trolley and crane Adjustable rotary limit switch for upper and lower limit setting • for highest and lowest hook positions • Directly activated by rope drum • Hook...

Open the catalog to page 4

Controls • IP55 and IP6S protection class • Soft stop and start with PLC and frequency control • Software for different applications • Maximum safety • Ergonomically designed to fit each specific hoist Rope Guide • High safety with pressure spring • Machined from cast iron (GGG60) • Machined from seamless tube • Finely machined grooves minimized rape wearing • Superior German technology • Helical gears processed with high precision • Quiet operation • High start and stall torque • Class F isolation and IP65 motor protection class • PTC thermistor overheat protection Brake • Long life time (one...

Open the catalog to page 5

Working Class Lifting Speed (m/min) Working Speed Cross Travel Speed Options (m/min) The above given technical specs are valid for contactor controlled hoists. The same hoists have the VFD controlled versions as well. I5

Open the catalog to page 7

Open the catalog to page 8

Working Speed The above given technical specs are valid for contactor controlled hoists. The same hoists have the VFD controlled versions as well.

Open the catalog to page 9

Working Speed Lifting Speed (m/min) Cross Travel Speed Options (m/min) The above given technical specs are valid for contactor controlled hoists. The same hoists have the VFD controlled versions as well. 8

Open the catalog to page 10

Open the catalog to page 11

Working Speed Lifting Speed (m/min) Cross Travel Speed Options (m / min) The above given technical specs are valid for contactor controlled hoists. The same hoists have the VFD controlled versions as well. 10

Open the catalog to page 12

GMD70Inverter Controlled Variable Speed Motor For Hoisting Double Speed Motor For Hoisting Working Speed Lifting Speed (m/min) Cross Travel Speed Options (m/min) Working Class Working Speed Lifting Speed (m/min) Cross Travel Speed Options (m/min)

Open the catalog to page 13

The hoists are produced between the capacities 1 ton and 80 ton's as standard, with different speed and working class options. The hoist groups involve stationary, monorail trolley and double girder trolley hoists. Their compact design provides the ability to work at narrow spaces. As the consequence of the improved technological investments, being fabricated within automation conditions, our hoists have the capability to serve for a long and continuous time, which has been proofed with many tests. The design of these hoists with modular, standard, easy maintenance and service abilities, have...

Open the catalog to page 14

Monorail Wire 'Lighten your loads with GURALP"

Open the catalog to page 16

G Increased lifting and travel speeds More duty cycle options G Ergonomic and light-weight design improved headroom maximises lifting height G Maintenance friendly direct drive cross travel mechanism as opposed to pinion drive

Open the catalog to page 17

The above given technical specs are valid for hoists with contactor controlled hoisting. GA monorail hoists have contactor control and VFD control options for both hoisting and cross traveling movements.

Open the catalog to page 18

Open the catalog to page 19

Open the catalog to page 20

Open the catalog to page 21

Open the catalog to page 22

Working Speed Lifting Speed (m/min) Cross Travel Speed Options (m/min) The above given technical specs are valid for hoists with contactor controlled hoisting. GA monorail hoists have contactor control and VFD control options for both hoisting and cross traveling movements.

Open the catalog to page 23