Electromagnet ”ME 10/UV75” Electric drive for valve gate systems GÜNTHER Heisskanaltechnik GmbH Industriegebiet Nord Sachsenberger Straße 1 35066 Frankenberg, Germany Tel.: +49 (0) 6451 . 5008-0 Fax: +49 (0) 6451 . 5008-50 [email protected] www.guenther-hotrunner.com ø30 0,05 3 Needle M4x6 for grounding connection Plunger 12.5 ø14.5 Fixing hole Sensor Position Sensor Position Covered 2 way terminal block ME 10/UV 75 Electromagnet The compact drive mechanism is designed for valve-gate systems with drive in the clamping plate. Up to 4 needles can be controlled simultaneously and very precisely by means of an external controller (eValveControl-4). Option of 8-drop parallel operation. The electric lifting magnets generate a mechanical stroke of approx. 10 mm, whereby the two end positions are maintained by permanent magnets. Electricity is only necessary for redirection. Switching times: current supply 200 ms. 10 mm stroke >0.1 seconds. Heat classification 155°C Advantages • simple assembly, mould construction and maintenance-free • no supply bores in the clamping plate • monitoring of the target needle position • needle adjustable ± 1 mm • floating bearings for valve-gates • individual control for each needle • high clamping force • unrestricted suitability for clean-room applications • for all-electric injection moulding machines Type ME 10/UV75 Stroke 10.0 mm Pn 620 watts Un 205 VDC In approx. 3,0 amperes Clamping force 1000 N Technical specifications elektromagnet Typ Nozzle ød Gating point-ø Needle-ø Delivery ME 10/UV75 mm AP-ø mm mm time 4, 5, 6 0.8, 1.0, 1.2, 1.4, 1.6 2 on stock 8 2.0, 2.5 3 on stock Technical specifications nozzle/ needle / delivery time Valve gate nozzle Manifold Electromagnet ME 10/UV 75 Electromagnet with needle Assembly Sensor Position Sensor Position Magnet Polarity Connection Polarity Connection Position of plunger Function of the needle closed open Dimension for the position B, needle closed

We have a very individual point of view. Yours! Electromagnet ME 10/UV75 Electric drive for valve gate systems •for all-electric injection moulding machines • unrestricted clean-room suitability eValveControl-4 Up to 4 needles can be controlled simultaneously and very precisely by means of an external controller. Option of 8-drop parallel operation.