*mydirectindustry

Catalogs
GÜHRING
GÜHROClamp - the top MQL clamping set from Guhring

GÜHROClamp - the top MQL clamping set from Guhring

Product catalog summary

Overview: The document introduces Guhring's top MQL clamping set, designed for various spindle contours, emphasizing its compatibility, high clamping force, and optimal coolant supply. It highlights the advantages of the 4-point clamping set and its suitability for both conventional cooling and minimal quantity lubrication (MQL).

Specifications: The clamping set is available in two designs, both compatible due to identical spindle contours. It features a 4-point spindle connection contour that provides radial support line and point contact, ensuring minimal radial deformation below 1 µm with HSK 50.

Advantages:

High Radial Rigidity: The clamping set is active over the complete length of the taper, offering high rigidity and enabling high-speed limits with HPC machining. This is confirmed by the VDMA (German Engineering Association).
Minimal Radial Deformation: Achieved through a central threaded spindle and defined clamping shoulder position, ensuring secure clamping and cost-efficient spindle contour manufacture.
MQL Suitable Design: A central, coaxial MQL duct ensures efficient coolant delivery without pockets, offering quick operating times.

New Features:

Guhring M Contour: The 4-point clamping sets are now available with different spindle contours, such as the M-contour (Mapal), allowing users to benefit from maximum clamping force and MQL machining.
PowerClamp: The clamping sets are also available for various spindle contours, including PowerClamp/KomLoc, enhancing their versatility.

Contact Information: For modifications to the Guhring 4-point clamping set for specific machining configurations, contact Guhring oHG at their Albstadt, Germany address, or via phone, fax, or email.

Catalog excerpts

GÜHROClamp - the top MQL clamping set from Guhring-2

The Genuine Article the clamping set with Guhring contour Guhring 4-point clamping sets offer maximum clamping force and optimal coolant supply. They are suitable for radial manual tool clamping in spindles (short drilling spindles, multi-spindle drilling heads) and are available in two designs, that thanks to their identical spindle contour are 100% compatible: • for conventional cooling • for minimal quantity lubrication (MQL)

Open the catalog to page 2

GÜHROClamp - the top MQL clamping set from Guhring-3

Advantages of the 4-point spindle connection contour: • Smallest bearing diameters d1 enable increased speed limits and minimal spindle centre distances (with multi-spindle heads) • The short bearing distance l1 ensures increased rigidity of the spindle • The spindle can be re-ground (i.e. following collision) as the locating face for the clamping set can be reset High radial rigidity • The 4-point clamping set is active over the complete length of the taper. Subsequently, it offers very high rigidity and enables high speed limits with HPC machining • The high radial rigidity is also confirmed...

Open the catalog to page 3

GÜHROClamp - the top MQL clamping set from Guhring-4

New: Guhring M contour Don’t ignore the benefits of the maximum clamping force for your tool holders and the advantages of MQL machining just because you don’t apply the Guhring spindle contour. Why? Because with immediate effect the excellent Guhring 4-point clamping sets are available with different current spindle contours, for example the M-contour (Mapal).

Open the catalog to page 4

GÜHROClamp - the top MQL clamping set from Guhring-6

NEW: PowerClamp Don’t ignore the benefits of the maximum clamping force for your tool holders and the advantages of MQL machining just because you don’t apply the Guhring spindle contour. Why? Because with immediate effect the excellent Guhring 4-point clamping sets are available with many different spindle contours, for example for PowerClamp/ KomLoc.

Open the catalog to page 6

GÜHROClamp - the top MQL clamping set from Guhring-8

Please do not hesitate to contact us. We will inform you about the possibilities to modify the Guhring 4-point clamping set for your special machining configuration! Guhring oHG P Box 10 02 47 • 72423 Albstadt .O. Herderstr. 50-54 • 72458 Albstadt Germany Tel. +49 74 31 17- 0 Fax +49 74 31 17- 21 279 [email protected] www.guehring.de

Open the catalog to page 8

All GÜHRING catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list