OPTIMA L COOL ANT DEL IVERY high c lampin g forc PERFEC e T CONC ENTRIC ITY MA XIMU M OPER ATIONA L SAFET Y

FROM THE SPINDLE TO THE CUTTING EDGE INNOVATIONS for THE METAL-CUTTING INDUSTRY MODULAR TOOL HOLDERS FROM THE TOOL MANUFACTURER’S PERSPECTIVE! DECADES OF OUR KNOWLEDGE & EXPERIENCE OFFERED TO YOU! HOLDERS PERFECTLY ADAPTED TO SUIT THE DEMANDS OF MODERN TOOLS!

Hydraulic chucks HSK-A hydraulic chucks HMC 3000 for clamping small diameters Product information Scope of delivery • perfect concentricity: < 3 µm at 10xd1 • incl. length adjustment screw • balancing quality: G6.3 / 30,000 rev./min • incl. hexagon chuck key Guhring no. 4912 • HSK-A to DIN 69893 • high clamping force • order coolant delivery set Guhring no. • quick, simple handling and accurate 4949 separately length setting • IC and GÜHROJET peripheral cooling When ordering, please always state ensure optimal chip evacuation and tool lubrication Guhring no. and code no., i.e.: „HMC 3000 hydraulic...

The 2015 edition supersedes all previous issues. This publication may not, in part or whole be reproduced. The publishers cannot be held responsible for any errors, omissions or changes of any kind. All products marked with “DIN“, deviating from the dimensions listed in the catalogue, can be delivered, as long as they are in conformity with the DIN standard form. Printed in Germany • 2015 Guhring KG Herderstraße 50-54 D-72458 Albstadt Germany Tel.: +49 74 31 17-0 Fax: +49 74 31 17-21 279 Internet: www.guehring.de E-Mail: [email protected]

DEVELOPMENT OF THE HSK INTERFACE, PIONEER OF FINE MACHINING MQL TECHNOLOGY “FROM THE SPINDLE TO THE CUTTING EDGE”

HIGH OPERATING SAFETY THANKS TO TEMPERATURE INDICATOR PVD-COATING FOR LONG TOOL LIFE DEVELOPMENTS NEVER BEEN SEEN BEFORE.

TOOLS FROM Ø 3MM DIRECT HYDRAULIC CLAMPING The advantages of hydraulic chuck & synchro chuck in one tool holder

Guhring MQL SYSTEMS DELIVERING ONLY THE REQUIRED AMOUNT

As one of the pioneers of MQL technology we have an extensive knowlege of minimal quantity lubrication. Guhring standard MQL Chucks have been supplied a thousand fold throughout the world and are recognised by the automotive industry as ideal MQL solutions as either the one or two channel systems. Higher cutting speeds and longer tool life are possible thanks to adapted cooling as well as highest surface qualities thanks to the pure lubricant. Workpieces and chips remain dry! Save the cost of de-greasing your workpieces as well as disposal of swarf and soluble oil. Our products for the MQL 1-channel...

Hydra ulic ch ucks from page from page from page from page from page Side lock holders Reduction bushes Clamping sleeves Quick-change chucks Collet holders Shrink-fit systems Face mill arbors Shell milling arbors Morse taper holders Semi-finished products

fine ma chining rs for Holde from page from page from page from page Overview tool holders Measuring and inspection instruments HSK Measuring 190 and inspection instruments spindle holders Floating holders M-contour clamping sets for MQL and IC Shrink fit technology Hydraulic chucks Installation dimensions for HSK adaptors 4-point clamping 169 sets for conventional cooling PowerClamp sets Measuring 193 and inspection instruments cooling lubrication General accessories

System finder 4619 HMC 3000, p. 22 4213 with increased clamping force, p. 23 4620 HMC 3000, p. 24 4221 with increased clamping force, p. 25 4727 TSG 3000, p. 43 4738, p. 44 4729 GÜHROJET with peripherical cooling, p. 46 Side lock holders ”Weldon“/”Whistle-Notch“ 4317 GÜHROJET Weldon, p. 112 4322 Whistle-Notch, p. 113 4234 GÜHROJET Weldon, p. 114 4233 Whistle-Notch, p. 115 GÜHROSYNC Tapping chucks, Quick change tapping chucks * 4576, p. 91 * 4525, p. 93 * 4342 Quick change tapping chucks with straight shank, p. 103 * 4577, p. 92 * 4525, p. 91 * 4342 Quick change tapping chucks with straight shank,...

4618 HMC 3000, p. 16 4299 with increased clamping force, p. 17 4296 with radial length setting, p. 19 4267 with increased clamping force, p. 20 4295 with radial length setting, p. 21 4232 GÜHROJET Weldon, p. 108 4329 Weldon, p. 109 4334 Whistle-Notch, p. 110 4601, p. 90 4525, p. 93 * 4328 Quick-change tapping chuck with IC, p. 92 4601, p. 90 4525, p. 93 * 4328 Quick-change tapping chuck with IC, p. 92

HMC 300 micro-p 0 recision dril ls HR 500 Perfect CLAMPING HMC 3000 hydraulic chucks together with solid carbide micro-precision drills or HR 500 high-performance reamers direct hydraulic clamping of shanks from Ø 3 mm quick, simple and accurate length setting perfect concentricity R < 3 µm with 10 x d1 C “HM lid ur d “so rills” o n d st ue 00” a ision q 5 re ec se -pr lea 0”, “HR icro P 0 m 30 bide es. r c a chu r bro

Hydraulic chucks

Hydraulic chucks Hydraulic chucks EXTREMELY FAST EXTREMELY ACCURATE EXTREMELY SMALL

Hydraulic chucks DIRECT HYDRAULIC CLAMPING OF TOOLS FROM Ø 3 MM HIGH-SPEED MACHINING PERFECT CONCENTRICITY R < 3 µM WITH 10 x D1

Product information • perfect concentricity: < 3 µm at 10xd1 • balancing quality: G2.5 / 25,000 rev./min or U< 1gmm • HSK-A to ISO 12164-1/DIN 69893-1 • high clamping force • quick, simple handling and accurate length setting • IC and GÜHROJET peripheral cooling ensure optimal chip evacuation and tool lubrication Scope of delivery • incl. length adjustment screw • incl. hexagon chuck key Guhring no. 4912 • order coolant delivery set Guhring no. 4949 separatel • sealed version available as special option Hydraulic chucks HSK-A hydraulic chucks HMC 3000 for clamping small diameters Discount group...

Hydraulic chucks HSK-A hydraulic chucks with increased clamping force Product information • balancing quality: G2.5 / 25,000 rev./min or U< 1gmm • axial length setting • max. deviation f. concentricity 3 μm • for tool shank tolerance h6 • to DIN 69882-7 • also available in extra-long lengths l1 = 150 / 160 mm (concentricity 5 μm) and 200 mm (concentricity 7 μm) • HSK-A to ISO 12164-1/DIN 69893-1 • order coolant delivery set Guhring no. 4949 separately Scope of delivery • incl. adjustment screw Guhring no. 4900 • incl. hexagon chuck key Guhring no. 4912 Discount group