GM300 | MQL-Program GUHRING - yoUR WoRLd-wIde PARTNER yoUR WoRLd-W dE paRtNeR WoRLd-WIdE woRLd-W dE ld-w e l

REQUIRED AMOUNT

As one of the pioneers of MQL technology we have an extensive knowlege of minimal quantity lubrication. guhring standard MQL Chucks have been supplied a thousand fold throughout the world and are recognised by the automotive industry as ideal MQL solutions as either the one or two channel systems. Higher cutting speeds and longer tool life are possible thanks to adapted cooling as well as highest surface qualities thanks to the pure lubricant. Workpieces and chips remain dry! save the cost of de-greasing your workpieces as well as disposal of swarf and soluble oil. our products for the MQL 1-channel...

shrink fit chucks Accessories oLoGy AmPING from page Gühroclamp mQL 4-point clamping sets m-contour clamping sets for mQL and Ic from page from page Hydraulic chucks from page from page

MQL SyS teM SyS te M finder Hydraulic chucks Hydraulic chucks HsK-A for manual tool change automatic tool change manual tool change HsK-A for automatic tool change MQL shrink fit chuck HsK-A guhring no. 4741 MQL shrink fit chuck HsK-A guhring no. 4735 MQL coolant delivery set HsK-A guhring no. 4939 MQL filler HsK-A guhring no. 4940 MQL adjustment screw with sealing lip for HsK-A guhring no. 4937 MQL adjustment screw with sealing lip fo HsK-A guhring no. 4937

TEcHNoLoGy ANd AdVANTAGEs Cost reduction due to reduced cleaning environment & health protection Less cooling lubrication requirement – high coolant effect Low process temperatures Low er working temperature at tool point instant cooling lubricant delivery direct response without losses High compatibility

the minimal quantity lubrication MQL 1-channel technology our products for the MQL 1-channel technology are identified by this symbol. Visual feature of the 1-channel system is the gold coloured MQL length setting screw. MQL coolant delivery set HsK-A guhring no. 4939 MQL shrink chuck HsK-A guhring no. 4741 Minimal dead area MQL adjustment screw with sealing lip for HsK-A guhring no. 4937 BY G ÜHRI NG Lic. HORKOS CORP

mQL 1-channel-hydraulic chucks Hsk-A for manual tool change Product information • to Guhring MQL standard • for 1-channel-systems • balancing quality: G6.3 / 15,000 rev./min • for tool shank tolerance h6 • axial length setting Scope of delivery • incl. MQL adjustment screw with sealing lip guhring no. 4937 and MQL coolant delivery set guhring no. 4940 (filler) • incl. hexagon chuck key Guhring no. 4912 Guhring no. Discount group

mQL 1-channel-hydraulic chucks Hsk-A for automatic tool change Product information • to Guhring MQL standard • for 1-channel-systems • balancing quality: G6.3 / 15,000 rev./min • for tool shank tolerance h6 • axial length setting Scope of delivery • incl. MQL adjustment screw with sealing lip guhring no. 4937 and MQL coolant delivery set guhring no. 4939 • incl. hexagon chuck key Guhring no. 4912 Discount group

mQL 1-channel shrink fit chucks Hsk-A for manual tool change Product information • to Guhring MQL standard • for 1-channel-systems • balancing quality: G6.3 / 15,000 rev./min • incl. balancing thread 4xM6/6xM6 • for tool shank tolerance h6 • also available in the lengths l1 = 120 mm and 160 mm (concentricity 5 μm) Scope of delivery • incl. MQL adjustment screw with sealing lip guhring no. 4937 and MQL coolant delivery set guhring no. 4940 • special dimensions on request Discount group

mQL 1-channel shrink fit chucks Hsk-A for manual tool change Guhring no. Discount group HsK-A d3

mQL 1-channel shrink fit chucks Hsk-A for automatic tool change Product information • to Guhring MQL standard • for 1-channel-systems • balancing quality: G6.3 / 15,000 rev./min • incl. balancing thread 4xM6/6xM6 • for tool shank tolerance h6 • max. deviation f. concentricity 3 μm • also available in the lengths l1 = 120 mm and 160 mm (concentricity 5 μm) Scope of delivery • incl. MQL adjustment screw with sealing lip guhring no. 4937 and MQL coolant delivery set guhring no. 4939 • special dimensions on request Discount group

mQL 1-channel shrink fit chucks Hsk-A for automatic tool change Guhring no. Discount group HsK-A d3 80 80 80 80 80 80 80 80 80 80

mQL 1-channel length setting screws for Hsk-A Product information • to Guhring MQL standard • for 1-channel-systems • for the use of tool shanks to guhring MQL standard • gold colour, corrosion protective coating to visually identify the 1-channel system • the patented face orientated o-ring provides axial force clamping which eliminates concentricity errors Scope of delivery • incl. sealing lip • MQL key tool for the assembly Guhring no. 4050 to be ordered separately Discount group

Sealing lips for MQL 1 -channel length setting screws Product information Scope of delivery • sealing lips for MQL 1 -channel length • packaging unit: 5 pieces setting screws Guhring no. 4937 Product information • special tool set for the secure assembly of • simplifies the handling when assembling the MQL length setting screws • prevents damage to the MQL sealing MQL 1-channel length setting screws length setting screws Guhring no. 4621 • complete set in case or additional set Discount group Case with complete 1 - channel basis set

mQL 1-channel coolant delivery set Hsk-A (filler) Product information • to Guhring MQL standard • for 1-channel-systems • for tool holders with manual tool change • optimal seal for MQL clamping set Discount group mQL 1-channel coolant delivery set Hsk-A Product information • to Guhring MQL standard • for 1-channel-systems • for tool holders with automatic tool change Discount group

mounting adaptor for mQL Hsk-A coolant delivery set (filler) Product information • adaptor for socket spanner, Guhring no. 4911 • for mounting MQL HSK-A coolant delivery set (filler), guhring no. 4940, for manual tool change Scope of delivery • incl. operating manual • socket spanner, Guhring no. 4911 to be ordered separately MQL setting screw with sealing lip for HsK-A Discount group socket spanner Hsk-A/Hsk-c extensions with mQL 4 point clamping set Product information • MQL suitable • for 1-channel-systems Scope of delivery • incl. MQL 4 point clamping set Guhring no. 4930 and adaptor for...