X3.3-G1
2Pages

The X3.3 has all the strength and reliability the genset industry has come to expect from the X Series range but in a smaller, lighter and more economical package. The X3.3 features direct fuel injection, resulting in cleaner, quieter and more fuel efficient performance. With a highly compact 4 cylinder envelope and extremely low heat rejection, the engine offers a high degree of installation flexibility. Bosch direct injection in-line pump for cleaner, more efficient fuel consumption. Parent bore block with deep, stiff crankcase and optimised rib arrangement to enhance strength and reduce noise. 12 volt electrics package as standard, with starter, alternator and fuel solenoid. This engine has been built to comply with CE certification. Minimal derate for high altitude or high ambient applications. Shallow oil pan and single spin-on oil and fuel filter. This engine has been designed in facilities certified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002. SAE ‘3/11.5’ flywheel/flywheel housing. Integrated Design - Coolpac products are supplied fitted with cooling package and heavy duty air cleaner for a complete power package. Each component has been has been specifically developed and rigorously tested for G-Drive products, ensuring high performance, durability and reliability. Service and Support - G-Drive products are backed by an uncompromising level of technical support and after sales service, delivered through a world class service network. 1500 rpm (50 Hz Ratings) Gross Engine Output Standby Typical Generator Set Output Base Our energy working for you.™ www.cumminsgdrive.com ©2008|Cummins G-Drive Engines|Specifications Subject to Change Without Notice|Cummins is a registered trademark of Cummins Inc. (01/08) (GDSS

General Engine Data Ratings Definitions Type Bore mm Stroke mm Displacement Litre Cylinder Block Battery Charging Alternator Starting Voltage Fuel System Fuel Filter Lube Oil Filter Type(s) Lube Oil Capacity (l) Flywheel Dimensions Emergency Standby Power (ESP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. 3 cycle, in-line, naturally aspirated 91.4 mm (3.59 in.) 127 mm (5...