BOTH AMF AND SYNCHRONIZING SAME UNIT FOR ALL FUNCTIONS INTERNET BASED MULTI-PROTOCOL FLEXIBLE WITH PLUG-IN MODULES AUTO LEARNING FEATURES • Diesel and gas genset support • 400Hz operation support • 400 event logs, full snapshot • All parameters front panel editable • 3 level configuration password • 128x64 graphical LCD display • Downloadable languages • Waveform display of V & I • Harmonic analysis of V & I • Synchroscope & check synch • Allows closed transfers • 16Amp MCB & GCB outputs • 8 configurable digital inputs • Inputs expandable to 40 • 8 configurable digital outputs • Outputs expandable to 40 • 7 configurable analog inputs • Both CANBUS-J1939 & MPU • 3 configurable service alarms • Multiple topologies • 6xCT, true mains metering • Supports up to 48 gensets • Automatic learning/self adjust • Direct governor & AVR control • Voltage and phase matching • kW & kVAr load sharing • True soft transfer in both ways • PLC functions • Peak Lopping / peak shaving • Mains de-coupling protection • R.O.C.O.F protection • Vector shift protection • Reverse power protection • Over/under freq. Protection • Over/under voltage protection • Smart load management • Smart genset sequencing • Run/stop priority support • Equal aging of gensets • Base load (power export) • Unmanaged distributed power export support • AVR & GOV droop support • Dead bus sensing • Multiple automatic exerciser • Weekly operation schedule • Dual mutual standby with equal aging of gensets • Manual “speed fine adjust” on selected ECUs • Automatic fuel pump control • Disable protections feature • Excess power protection • Reverse power protection • Overload IDMT protection • Load shedding, dummy load • Multiple load management • Current unbalance protection • Voltage unbalance protection • Fuel filling & fuel theft alarms • Contactor & MCB drive • Battery back-up real time clock • Idle speed control • Battery charge run enabled • Combat mode support • Multiple nominal conditions • 4 quadrant genset power counters • Mains power counters • Fuel filling counter • Fuel consumption counter • Modem & ethernet diagnostics • Configurable through USB, RS-485, Ethernet and GPRS • Free configuration program • Allows SMS controls • Ready for central monitoring ethernet & GPRS • Mobile

2G GSM Modem 3G GSM Modem 4G GSM Mode Wi-Fi (802.11 b/g/n) Ethernet 10/100 Mbits USB Host RS-232 (isolated) RS-485 (isolated) Synchro/LoadShare Module 3x AC Current Inputs 3x Analog Inputs Multi genset synch & load share Mains synchronization Single genset parallel with mains AMF unit (uninterrupted transfer) ATS unit (uninterrupted transfer) Remote start controller Manual start controller Engine controller Remote display panel Central Monitoring Embedded Web Server USB GPS (geo-location) SMS E-mail Modbus Modbus TCP/IP SNMP 1.0 with trap HTML UDP SNTP Backpanel view Plug-in modules MULTI GENSET...

SCOPEMETER & HARMONICS RAINBOW PLUS PROGRAM RAINBOW SCADA CENTRAL MONITORING TECHNICAL SPECIFICATIONS Alternator voltage: 0 to 300 V-AC (Ph-N) Alternator frequency: 0-600 Hz. Mains voltage: 0 to 300 V-AC (Ph-N) Mains frequency: 0-600 Hz. Topology: 1-2-3 phases, with or without neutral DC Supply Range: 8.0 to 36.0 V-DC. V-A-cos Accuracy: 0.5% + 1 digit kW-kVA-kVAr Accuracy: 1.0% + 1 digit Current consumption: 500 mA-DC max. Current Inputs: from current transformers. ../5A or ../1A. Digital inputs: input voltage 0 to 36 V-DC. Analog input range: 0-5000 ohms. Mains and genset contactor outputs:...

TYPICAL CONNECTIONS