1W 3KVDC Isolation & Regulated Dual Output DC-DC Converters TPI series are specially designed for 3KVDC isolation & regulated dual output application, the input voltage range within ±5%, 3KVDC isolation and regulated output with very low ripple noise.

TPI Series ISOLATION CHARACTERISTICS Note: 1. All specifications measured at TA=25° C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. See below recommended circuits for more details; 3. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life of product. Ambient Temperature(°C) MECHANICAL DIMENSIONS SIP Package RECOMMENDED FOOTPRINT DETAILS TUBE OUTLINE DIMENSIONS Unless otherwise stated all dimensions in mm ±0.5mm.

TPI Series APPLICATION NOTE_I.Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load could not be less than 10% of the full load. If the actual output power is very small,please connect a resistor with proper resistance at the output end in parallel to increase the load. If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of theDC/DC converter, see(Figure 1). It should also be noted that the inductance and the frequency of the “LC” filtering network...