TP40DG Series 40W 1.5KVDC Isolated Wide Input Voltage DC/DC Converters The rated output power of TP40DG converters is 40W,the outline dimensions is "50.8*50.8*11.2", 2:1 input voltage range ,the voltage range is 9V-18V,18V-36V,36V-72V.The accuracy of the converter can reach ±1 %,it can be widely used in telecommunications, railway transportation, instrument and etc. 40W output power 50.8mm*50.8mm*11.2mm standard package 2:1 input voltage range Fixed switching frequency Input under voltage protection Super capability with capacitive load All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified

TP40DG Series Remote control CTL GENERAL CHARACTERISTICS! Startup voltage Input under voltage protection Input under voltage protection Input under voltage protection Startup time Output rise time from 5% to 100% Remote CTL-Vin Module in every environment temperature rating, case temperature under shall not exceed the maximum case temperature level.

W:4:1 Wide voltage input range Output voltage S: Single output D: Dual output Input Rated Voltage Package type DC-DC Output rated power Brand name Single Output: EMAIL: [email protected]

TP40DG Series RECOMMEND CIRCUIT Dual Output: Add input capacitance Cin is helpful to improve the electromagnetic compatibility, recommend Cin use 47 uF-100uF of the electrolytic capacitors. If the module connect to the digital circuits, please add the Cout、Cout1、Cout2. If Cout, Cout1, Cout2 value is too high or lower ESR, it will cause the module instable, The recommended value of Cout, Cout1, Cout2 should be 100 uF/A, the current here means the output current. Trim application &Trim Resistance Raise the output Voltage W O P Down the output voltage In dual and triple output modules, this application...