*mydirectindustry

Catalogs
Guangzhou Top Power Electronics Technology Co.,Ltd
TP30DG Series

TP30DG Series

Product catalog summary

Description: The TP30DG Series converters offer a rated output power of 30W with dimensions of 50.8mm x 50.8mm x 11.2mm. They support wide input voltage ranges of 2:1 and 4:1, including 9V-18V, 18V-36V, 36V-72V, 9V-36V, and 18V-72V DC. The converters are highly accurate with a precision of ±1% and are suitable for telecommunications, railway transportation, and instrumentation applications.

Features: Key features include 30W output power, long-term short-circuit protection, input under-voltage protection, and a fixed switching frequency. The converters operate within a temperature range of -40°C to 85°C and are housed in a metal shielding package compliant with RoHS standards. They provide 1.5KVDC isolation.

Selection Guide: The document lists various models with different input and output voltage specifications, efficiencies, and current ratings. For example, the TP30DG12S03 model has an input voltage range of 9-18V and outputs 3.3V at 6A with an efficiency of 85%.

General Characteristics: The converters have an isolation voltage of up to 1500 VDC and an insulation resistance of 100M Ohm. They are designed to withstand seismic vibrations and have a Mean Time Between Failures (MTBF) of 500,000 hours.

Output Characteristics: The voltage accuracy is maintained at ±1%, with line and load regulation at ±0.2% and ±0.5%, respectively. The converters can handle over-current protection up to 120% and have a transient recovery time of ±5% within 400 microseconds.

Input Characteristics: Startup voltages vary by model, with the 12V input module starting at 9.2V to 9.8V. Input under-voltage protection is also specified for different models.

Environmental Characteristics: The converters can operate in humidity levels from 5% to 95% and have a storage temperature range of -55°C to 125°C. The maximum case temperature should not exceed 105°C.

Mechanical Dimensions: The document provides detailed mechanical dimensions and pin connections for single and dual output configurations.

Using Attentions: The document warns against input reverse polarity, long-term overload conditions, and exceeding the maximum input voltage range, as these can cause irreversible damage. Recommendations for input and output capacitance are provided to improve electromagnetic compatibility and stability.

Catalog excerpts

TP30DG Series 30W 1.5KVDC Isolated Wide Voltage Input DC/DC Converters The rated output power of TP30DG converters is 30W,the outline dimensions is 50.8*50.8*11.2,2:1 and 4:1 wide input voltage range ,the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1%,It can be widely used in telecommunications ,railway transportation, instrument and etc. 30W output power 50.8mm*50.8mm*11.2mm standard package 2:1 and 4:1 wide input voltage range Input under voltage protection Long term short-circuit protection Super capability with capacitive load Fixed switching frequency Metal shielding package RoHs compliance All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.

Open the catalog to page 1

TP30DG Series Insulation resistance Over-current protection mode Case material INPUT CHARACTERISTICS! Free air convection Metal case Output rise time from 5% to 100% Remote CTL-Vin Remote CTL NC(The control level 12V-40V) OUTPUT CHARACTERISTICS parameter Test conditions Voltage accuracy Line regulation Load regulation Io=0.1...1.0 x Ionom Vi=Vi rated Vimin<Vi<Vimax Io=0.1...1.0 x Ionom Vimin< Vi<Vimax Auxiliary voltage accuracy Ripple and noise Over-current protection Output voltage trim range Transient recovery time Transient overshoot time Switch frequency GENERAL CHARACTERISTICS! Isolation...

Open the catalog to page 2

TP30DG SeriesMECHANICAL DIMENSIONS PIN CONNECTIONS DIP Package W:4:1 Wide voltage input range Output voltage S: Single output D: Dual output Input Rated Voltage Package type DC-DC Output rated power Brand name Single Output: EMAIL: [email protected]

Open the catalog to page 3

TP30DG Series RECOMMEND CIRCUIT Dual Output: + vin Add input capacitance Cin is helpful to improve the electromagnetic compatibility, recommend Cin use 47 uF-100uF of the electrolytic capacitors. If the module connect to the digital circuits, please add the Cout、Cout1、Cout2. If Cout, Cout1, Cout2 value is too high or lower ESR, it will cause the module instable, The recommended value of Cout, Cout1, Cout2 should be 100 uF/A, the current here means the output current. Trim application &Trim Resistance Raise the output Voltage W O P Down the output voltage In dual and triple output modules, this...

Open the catalog to page 4

TP30DG Series

TP30DG Series

Catalog excerpts

All Guangzhou Top Power Electronics Technology Co.,Ltd catalogs and technical brochures