TP25DG Series 25W 1.5KVDC Isolated Wide Input Voltage DC/DC Converters The rated output power of TP25DG converters is 25W, the outline dimensions is 50.8x50.8x11.2, 2:1 and 4:1 wide input voltage range, the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1%, it can be widely used in telecommunications, railway transportation, instrument and etc.

TP25DG Series Insulation resistance Over-current protection mode All specifications typicalat TA=25°C, nominal input voltage and rated output current unless otherwise specified. Input under voltage protection Input under voltage protection Startup time Startup voltage Startup voltage Output rise time from 5% to 100% Remote CTL-Vin Remote CTL NC(The control level 12V-40V) The12V input module(9-18v) The24V input module(18-36) OUTPUT CHARACTERISTICS parameter Test conditions Voltage accuracy Line regulation Load regulation Auxiliary voltage accur Ripple and noise Over-current protection Output voltage...

W:4:1 Wide voltage input range Output voltage S: Single output D: Dual output Input Rated Voltage Package type DC-DC Output rated power Brand name Single Output: EMAIL: [email protected]

TP25DG Series RECOMMEND CIRCUIT Dual Output： Add input capacitance Cin is helpful to improve the electromagnetic compatibility, recommend Cin use 47 uF-100uF of the electrolytic capacitors. If the module connect to the digital circuits, please add the Cout、Cout1、Cout2. If Cout, Cout1, Cout2 value is too high or lower ESR, it will cause the module instable, The recommended value of Cout, Cout1, Cout2 should be 100 uF/A, the current here means the output current. Trim application &Trim Resistance Raise the output Voltage W O P Down the output voltage In dual and triple output modules, this application...