Catalogs >
Guangzhou Top Power Electronics Technology Co.,Ltd >
TP10DC series 10W DC/DC converter

TP10DC series 10W DC/DC converter
4Pages

Catalog excerpts

10W 1.5KVDC Isolated Wide Input Voltage DC/DC Converters The rated output power of TP10DC converters is 10W,the outline dimensions is "50.8*25.4*11.2", 2:1 and 4:1 wide input voltage range, the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1%,it can be widely used in telecommunications, railway transportation, instrument and etc. Fixed switching frequency All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.

Open the catalog to page 1

TP10DC Series GENERAL CHARACTERISTICS parameter Test conditions Isolation voltage Isolation resistance Over-current protection mode Full input range Auto recovery Case material Metal case INPUT CHARACTERISTICS parameter Test conditions Startup voltage Startup voltage Startup voltage Startup voltage Startup voltage Start time Input rising time from 5%-100% Test conditions Voltage accuracy Io=0.1…1.0 x Ionom Vi=Vi rated Line regulation OUTPUT CHARACTERISTICS Load regulation Main Load and auxiliary load differ 25%,the auxiliary Auxiliary voltage accuracy circuit of the load with at least 25%,...

Open the catalog to page 2

TP10DC Series TEMPERATURE DERATING GRAPHS 12 55° C Output Power(W) Safe Operating Area MECHANICAL DIMENSIONS MODEL SELECTION bottom view Dual output Single output 24 S 05 W W:4:1 Wide voltage input range Output voltage S: single output Input Rated Voltage Package type DC-DC Output rated power Brand name

Open the catalog to page 3

TP10DC Series RECOMMEND CIRCUIT: Single Output： Dual Output： Add input capacitance Cin is helpful to improve the electromagnetic compatibility, recommend Cin use 47 uF-100uF of the electrolytic capacitors. If the module connect to the digital circuits, please add the Cout、Cout1、Cout2. If Cout, Cout1, Cout2 value is too high or lower ESR, it will cause the module instable, The recommended value of Cout, Cout1, Cout2 should be 100 uF/A, the current here means the output current. USING ATTENTIONS Module will cause irreversible damage when in the state of the input reverse polarity. Module will...

Open the catalog to page 4