7W 4KVAC Isolation Wide Input AC/DC Converters The rated output power of TP07AC series is7W with wide input voltage range, for both AC input and DC input application. High reliability, precision, large power density, ultra-small size, no external heat sink required, stable output voltage and etc, with over current protection, EMI filter circuit, the rectifier filter circuit, 4000V isolation voltage, short circuit, overload, internal thermal protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control and other electronic systems. Voltage accuracy Line regulation Full load Load regulation Standby power consumption Over current protection Over voltage protection Short-circuit protection Switch frequency Power-down hold time

• Case temperature shall not exceed the maximum case temperature. * Pin not fitted on single output variants Units:mm Tolerance:±0.2mm W:4:1 Wide voltage input range Main (auxiliary) output voltage S:single output, D:Dual output Rated input voltage Package type AC-DC Rated output power Brand name

The output filter capacitor C2, the proposed use of high-frequency low-resistance electrolytic capacitors, capacity and flow of current refer to the manufacturers to provide technical specifications. The output capacitor withstanding voltage derating factor is greater than 80%. C1 is a ceramic capacitor to remove high frequency noise. Recommended external N C thermistor, model: 12D-5. Recommended external MOV varistor, type: 14D561K. 2. EMC solutions - recommended circuit EMC Solutions - Recommended Circuit PCB Lavout Note: safety regulations and the width of the proposed line: line width ^ 3mm,...