TKE-W5 Series 0.5W 1. 5 KV DC and 3KVDC Isolated Miniature Single Output DC/DC Converters The TKE-W5 series are miniature, isolated 0.5W DC/DC converters in a SIP and DIP package. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency.

TKE-W5 Series INPUT CHARACTERISTICS All specifications typical at TA=25"C, nominal input voltage and rated output current unless otherwise specified. Load Regulation(10% load to rated load) Isolation test voltage DIP package Isolation test voltage SIP package Resistance tested for 1 second tested for 1 second Viso= 1000VDC Load Regulation(10% load to rated load) 5V output types 9V output types 12V output types

TKE-W5 SeriesTEMPERATURE DERATING GRAPHS 0.75 Ambient Temperature(°C) TOLERANCE ENVELOPES All other types MECHANICAL DIMENSIONS PIN CONNECTIONS! All dimensions in mm ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position. Weight:1.09g(SIP) 1.25g(DIP)

TKE-W5 Series RECOMMENDED FOOTPRINT DETAILS 1.00 孔 44HOLES 1.15 TUBE OUTLINE DIMENSIONS 8 Pin DIP Tube Unless otherwise stated all dimensions in mm ±0.5mm Tube length(8 Pin DIP):520mm ±2mm Tube length(4 Pin SIP):525mm ±2mm SOLDERING INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. Both SIP and DIP types in this series are backward compatible with Sn/Pb soldering systems.