TKA Series 1W 3KVDC Isolated Miniature Dual Output DC/DC Converters The TKA series are miniature, isolated 1W DC/DC converters in a SIP and DIP package. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency, lower output ripple noise and 3KVDC isolation. RoHS compliant CE certification Efficiency up to 83% Operating temperature:-40C to 105C UL 94V-0 package material Internal SMD construction Industry standard pinout Power sharing on output Input voltage :3.3V, 5V,12V,24V Output voltage: ±3.3V, ±5V, ±9V, ±12V, ±15V, ±24V Add suffix “P” for continuous short circuit protection, for example TKA0505SP.

TKA Series INPUT CHARACTERISTICS Lead temperature 1.5mm from case for 12 seconds Internal power dissipation Input voltage Vin, TKA03 Input voltage Vin, TKA05 Input voltage Vin, TKA12 Input voltage Vin, TKA24_ ISOLATION CHARACTERISTICS! Parameter Isolation test voltage Resistance Conditions tested for 1 second Viso= 1000VDC Units VDC GO All specifications typical at TA=25"C, nominal input voltage and rated output current unless otherwise specified. GENERAL CHARACTERISTICS Parameter Switching frequency TOLERANCE ENVELOPES www.gztoppower.com TEL:020-82019000 EMAIL:[email protected] page 2 of...

MECHANICAL DIMENSIONS DIP Package bottom view All dimensions in ±0.25mm . All pins on a 2.54 mm pitch and within ±0.25mm of true position weight:1.4g(SIP) 1.9g(DIP) TUBE OUTLINE DIMENSIONS 14 Pin DIP Tube Unless otherwise stated all dimensions in mm±0.5mm Tube length(14 Pin DIP): 520mm ±2mm Tube length(6 Pin SIP): 525mm ±2mm This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300"C for 10 seconds. Both types in this series are backward compatible with Sn/Pb soldering systems.