TP03AL Series 3W 3KVAC Isolation Wide Input AC/DC Converters The rated output power of TP03AL series is 3W with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, safety isolation .Widely used in industrial control and electrical instrumentation, smart home, which do not have high requirement on EMC. The EMC external circuit must be added if the products need to be applied to EMC harsh environment.

EMS Frequency magnetic field immunity MTBF Weight Dimensions >3000,000hours @ 25'C 10g 35*21*13mm (L*W*H) 1.This model is open Frame, in order to meet the safety requirements of the module primary and secondary external 2.The data in this manual are measured at TA = 25 ° C, humidity <75%, input nominal voltage (115Vac and 230Vac) and output rated load,except for special instructions. 3.In order to improve the efficiency of light load conversion, when the module load <30% of the rated load, the module may have weak audio noise, but does not affect the product performance and reliability. 4. After...

TP03AL SeriesTYPICAL APPLICATION CIRCUIT Notes: 1. C1 is a ceramic capacitor to filter out high frequency noise. L1 current flows please refer to the technical specifications provided by the manufacturers, the current derating more than 80%. TVS tube in the module exception protection after the circuit, it is recommended to use. 2. In the general application, Its not mandatory to use the common-mode inductance within the dashed box; You can use this common-mode inductance (L=30mH) to meet the higher EMC requirements. 3. For technical support, please contact our engineers. Application circuit...