20SDR-360-XS

Product catalog summary

Description: The TPR/SDR-360-XS series is a 360W AC-DC DIN rail power supply with an input voltage range of 85-264VAC and output voltages of 24V, 36V, and 48V. It features high reliability, efficiency, and stable output voltage, with protections against short circuits and overloads. It is suitable for telecommunications, industrial control, and other electronic systems.

Output Characteristics: The power supply offers output voltage regulation with specific ranges for each voltage level. It supports rated output currents of up to 15A for 24V, 10A for 36V, and 7.5A for 48V. Ripple and noise levels vary with temperature, and the unit has a capacitive load capacity of 10000uF. Line and load regulation are specified, along with setup and hold-up times.

Features: The unit supports AC and DC inputs, has a built-in DC OK relay contact, and operates within a temperature range of -25℃ to 70℃. It includes protections for short circuit, overload, over-voltage, and over-temperature. The power supply is RoHS compliant and has a high efficiency of up to 93%.

Input Characteristics: The rated input voltage range is 100VAC to 240VAC, with a frequency range of 47Hz to 63Hz. The power supply has specific input current and inrush current characteristics, and a power factor of 0.99 at 110VAC.

Protection: The unit provides overload protection with auto recovery, over-voltage protection with constant voltage, and over-temperature protection with auto recovery after cooling.

Environment Characteristics: The operating temperature range is -25℃ to 70℃ with humidity levels of 20% to 90% RH. The unit is designed to withstand vibrations and pulses as per IEC standards and can operate at altitudes up to 6000m.

Safety & EMC Standards: The power supply meets UL and EN safety standards and complies with EMC emission and immunity standards. It also meets harmonic current standards.

Others: The unit weighs 0.83kg and has dimensions of 50x124x127mm. It features a cooling method by free air flow and supports parallel function.

Reliability Characteristics: The MTBF is 300,000 hours at 25℃, and the design life of electrolytic capacitors is over 5 years at 40℃ with full output.

Mounting Method Instruction: Various mounting methods are provided for different output voltages, with derating considerations for different input voltages.

Catalog excerpts

360W AC-DC DIN RAIL Power Supply The rated output power of TPR/SDR-360-XS series is 360W, input voltage range: 85-264VAC, output voltage : 24V,36V,48V,High reliability, effificency , stable output voltage ,etc., with short circuit & overload protection, Widely used in telecommunications, industrial control,signal control , instrumentation, data acquisition, New Energy, Security,and other electronic systems. Built-in current sharing function Support 1+1 or N+1 redundant system (suggest to use redundancy Easy Fuse Tripping due to High Overload Current 150%(540W) peak load capacity High efficiency up to 93%

Open the catalog to page 1

TPR/SDR-360-XS Series INPUT characteristics!

Open the catalog to page 2

TPR/SDR-360-XS SeriesOTHERS DC OK relay contact rating Max 30V/1A or 60V/0.3A or 30Vac/0.3A Resistive load DC OK LED V On: when output voltage is up to 90% of rated output voltage, V Off: when output voltage is down to 80% of rated output voltage 1.AC terminal blocks installation information 2 DC terminal blocks installation information

Open the catalog to page 3

continuous working short time working,3$ continuousworking www.gztoppower.com

Open the catalog to page 4

MOUNTING METHOD INSTRUCTION A1 is recommended output current , A2 is the allowed max output current (PSU lifetime is around half of A1) Below curves are tested under 230Vac(179~264Vac), when 110Vac input(85~175Vac), all derating points drops 10℃

Open the catalog to page 5