HL FILTER liquid filter cartridges
5Pages

STRING WOUND FILTER CARTRIDGE STRUCTURE String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. FEATURES Eliminate effectively the suspended objects and particles in the liquid. With large flow and small pressure loss. With high residual loan and long service life. Can resist higher filtering pressure. Provide different kinds of materials for filter cartridge according to the nature of liquid to be filtered, thus ensuring the good compatibility between them.We have high quality material with no silicon, Fluorescence agent and oil in. MAIN TECHICAL SPECIFICATION Dimension: Outer diameter Ø63 ㎜、 Ø60 Inner diameter Ø 28㎜、Ø 30㎜ Pressure: 0.5MPa Temperature: 60℃(for polypropylene) ±1 ±1 120℃(for stainless steel core, cotton fiber) FLOW OF FILTER CARTRIDGE The recommended flow for the filter cartridges in service is shown in the table (L/h for a 250㎜ filter cartridge) Viscosity Micron Rate (µ m) 1cs(water) 30cs 60cs 120cs 250cs 0.5 70 60 40 25 - 1 150 90 60 40 - 3 300 120 80 50 - 5 500 170 120 60 45 10 300 140 70 60 1100 540 220 100 95 30 1200 670 300 150 130 50 1200 880 440 180 160 75 Note: 800 20 1200 1200 690 230 200 100 1200 1200 750 270 220 1. The flow of each 250mm filter cartridge should not exceed 1200 L/h, otherwise its precision may be affected. 2. The flows shown in the above table are only the recommended values. The actual flow of the filter cartridge in service may change due to the liquid nature, temperature, the nature of the eliminated particles, the contents of the particles, etc. 3. It is recommended that a new filter cartridge used in the first time should work under a pressure drop of 0.1—0.3 bar, while the final pressure drop for the filter cartridge exchange is set at 2.5 bar. For the filter cartridge whose precision is lower than 10µm, the pressure drop for the filter cartridge exchange had better be set at 1.0—1.5 bar. APPLICATION Mainly used for the purification of process water and solutions in food and drinks, electronic, pharmaceutical, petroleum and chemical industries.

ACTIVATED CARBON FILTER CARTRIDGE(CTO&UDF) Activated carbon filter cartridge is made of activated carbon particles, which are sintered together with cohesive solvent. The inner layer of the filter cartridge is polypropylene frame that can improve the filter cartridge’s Pressure-resistant strength. Both the frame and the outer layers of the activated carbon filter cartridge are wrapped by two layers of super fine polypropylene fiber felt, so that the filter cartridge has dual function of filtration and purification. The filter cartridge has a white plastic net cover so as to have a clean and...

PP SPUN FILTER CARTRDGE SUMMERY PP Spun filter cartridge is a tube-shaped product, which is made of polypropylene through melting, spraying, drawing, receiving and processes. FEATURES Being light, corrosive proof and high-pressure resistant, and with a large flow and high micron rate. SPECIFICATION Length: 250㎜ (10″) 500㎜(20″) 750㎜(30″) 1000㎜(40″) Diameter: Outer 2 diameter: Ø 63 ㎜ Inner diameter: Ø30㎜ Ø28㎜ Micron Rate: 1, 3, 5, 10, 20, 30, 50, 75, 100µm ± TECHNICAL DATA Operation pressure drop: 0.01 Mpa Max pressure: 0.4 Mpa Max pressure drop: 0.2Mpa Max temperature: 60℃ TECHNICAL INDEX...

PP PLEATED FILTER CARTRIDGE SUMMERY PP series pleated filter cartridge is constructed of imported polypropylene (PP) membrane media and nonwoven support materials. The materials of cage, core and end caps are polypropylene. Adaptors are thermally welded with media, so there is no possibility to cause pollution. FEATURES Excellent performance of chemical compatibility, high flow Non-fiber releasing fit for pharmaceutics and food industry requirements, passed 100% integrity test. Flushed with ultrapure water. SPECIFICATION 1. Filter Precision: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm,...

FILTER BAG DETAILED PRODUCT DESCRIPTION Good quality, high efficiency, long life service, competitive price Material: Needle felt PP/PE and Nylon (POLYAMIDE) or polyester monofilament/ multifilament meshes, Construction: sewn or welded Micron Rating: 0.5-1250 Collar Type: steel ring or plastic collar Sew method: five-thread flat loc FEATURES Filter bags are washable PARAMETER OF SF FILTER BAG Model No. Filtration area (㎡) Volume (L) Diameter Length Max Water Flow (L/hr) P1S 0.25 8.0 7inch(180㎜) 17inch(450㎜) 20 P2S 0.50 17.0 7inch(180㎜) 32inch(810㎜) 40 P3S 0.09 1.3 4inch(108㎜) 9inch(230㎜) 6...