紫外光激光打标机介绍 UV Laser Marking Mac

机器外观 Machine appea

机器外观 Machine appea

1. Key switch 2. Power switch Control switch error——故障显示灯 be ready——机器正常状态灯 error——fa

工作区域 Work area 工作范围与机器的场镜尺寸相关。例如： 110mm*110mm The working range is related to the F-theta Scan Lens size o

基本焦距 Basic focal length 通过查看刻度尺上的数值，为162.5mm。那 机器的基本焦距为162.5mm。 By looking at the value on the scale, it is 162.5mm. The basic focal length of that machine is 162.5mm. 如何在工作时获取正确的焦距值？ 例如：材料厚度2mm，基本焦距162.5mm。那需要调整高度 为162.5+2=164.5mm。 How to get the correct focal length value while working? For example: material thickness 2mm, basic focal length 162.5mm.

手动升降平台 Manual lifting platform 通过调整手轮，调整镜头与材料之间的高度，符合正确的焦距高度。 By adjusting the handwheel, the height between the

辅助固定块 Auxiliary fixed block 辅助固定材料的加工位置，重复加 工，降低误差。 Auxiliary fix the processing position

机器电源开关及连接 Machine power switch

日常注意事项 Daily considerations Measuring material thickness Note the focal length