*mydirectindustry

Catalogs
Guangzhou Biaoji Packaging Equipment Co., Ltd.
SGW-810 Light Transmittance and Haze Tester A0(20220311)

SGW-810 Light Transmittance and Haze Tester A0(20220311)

Product catalog summary

Introduction
The SGW-810 Light Transmittance and Haze Tester is designed to measure the light transmittance and haze degree of transparent and semi-transparent materials, as well as the turbidity or clarity of liquid samples. It is applicable in industries such as plastics, coatings, and research institutes.

Test Principle
The tester evaluates light-transmitting and wide-angle-light-scattering properties of materials. It uses two procedures for measuring luminous transmittance and haze, suitable for materials with a haze value greater than 30% according to Practice E 167. Measurements are in SI units.

Standards
The device complies with ASTM D1003, JISK7105-81, and GB 2410-2008 standards.

Specifications

Preheating time: 30 minutes
Accuracy: Light transmittance ≤1%, Haze degree varies with value
Repeatability: Light transmittance 0.5%, Haze degree varies with value
Test range: Light transmittance 0-100%, Haze degree 0-30%
Minimum reading: 0.01% for both parameters
Power supply: 220V, 50Hz
Weight: 15kg

Instrument Structure

Optical system: Collimating lighting, diffuse horizon, integrating sphere photoelectricity receiving method
Sample size: Solid and film samples 50mm x 50mm, Liquid samples 50mm x 50mm x 10mm
Light source: Light source C (6774K)
Receiver: Silicon photocell
Electronic system: LCD
Sample window size: Entrance ∅ 25mm, Exit ∅ 21mm

Service Commitment

Free packaging inspection technical support
One-year warranty, free software upgrades, and lifetime technical support
Free training at the factory with accommodation and food
Instrument trade-in policy and backup instruments available
Testing center for sample testing and data comparison
Reference Standards Development Center for calibration services

Company Introduction
Guangzhou Biaoji Packaging Equipment Co., Ltd., established in 2002, specializes in R&D, production, and sales of packaging testing instruments and equipment. The company aims to provide high-quality products and services for various industries, aspiring to lead in global packaging testing.

Contact Information:
Address: No. 1, Minghua 3rd Street, Jinxiu Road, Guangzhou Economic and Technological Development Zone
Tel: 020-8615 3789, 8615 3790
After-sales hotline: 4007886855
Website: https://www.gbpitester.com/
Email: [email protected]

Catalog excerpts

SGW-810 Light Transmittance and Haze Tester A0(20220311)-1

Light Transmittance and Haze Tester SGW-810

Open the catalog to page 1

SGW-810 Light Transmittance and Haze Tester A0(20220311)-2

Introduction Use for test the light transmittance and haze degree of all transparent and semi-transparent parallel plane samples (plastic plate, sheets etc), and turbidity or clarity of liquid samples (water, drinks etc), used in the industries of plastics, membrane, coatings and paints, printing ink, research institute and so on. Test principle The equipment is applied to the evaluation of specific light-transmitting and wide-angle-light-scattering properties of planar sections of materials such as essentially transparent plastic. Two procedures are provided for the measurement of luminous transmittance...

Open the catalog to page 2

SGW-810 Light Transmittance and Haze Tester A0(20220311)-3

Specification Item Technical Parameters Preheating time 30min light transmittance：≤1% haze degree： when haze degree≤0.5％，≤±0.1％ when haze degree＞0.5％，≤±0.3％ light transmittance： haze degree： Repeatability when haze degree≤0.5％，0.05％ when haze degree＞0.5％，0.1％ Test range Minimum reading

Open the catalog to page 3

SGW-810 Light Transmittance and Haze Tester A0(20220311)-4

Instrument Structure Item Optical system Technical Parameters Collimating lighting, diffuse horizon, integrating sphere photoelectricity receiving method Solid sample：50mm×50mm Light source Silicon photocell Electronic system Size of sample window entrance window∅ 25mm exit window∅ 21mm Note: GBPI has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly. The above situation will not be notified. GBPI reserves the right of modification and final

Open the catalog to page 4

SGW-810 Light Transmittance and Haze Tester A0(20220311)-5

Service Commitment Company Introduction Free packaging inspection technical support. Guangzhou Biaoji Packaging Equipment Co., One-year warranty for instrument, free software upgrade service, and lifetime free Guangzhou Economic Development Zone. It is a technical support. company integrating R&D, production and sales Free to the factory to train the operation of of packaging testing instruments, packaging the instrument, qualified people issued equipment, modified atmosphere preservation graduation certificates, free accommodation equipment and other products, as well as providing third-party...

Open the catalog to page 5

SGW-810 Light Transmittance and Haze Tester A0(20220311)-6

Address: No. 1, Minghua 3rd Street, Jinxiu Road, Guangzhou Economic and Technological Development Zone Tel: 020-8615 3789, 8615 3790 After-sales hotline: 4007886855 Website:https://www.gbpitester.com/ Email: [email protected]

Open the catalog to page 6

All Guangzhou Biaoji Packaging Equipment Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list