Introduction RH-3000 Compression Tester is mainly used for testing corrugated core paper, container board (kraft liner), corrugated board, etc. Applicable to paper and paperboard ring crush strength (RCT), corrugated medium paper flat crush strength (CMT) and crush strength (CCT), corrugated board edge crush strength (ECT), adhesive (peel) strength (PAT), flat crush Tests for strength (FCT) and compressive strength of other material products; can also be used for paper, cardboard and corrugated board thickness. It is used in paper making, packaging, printing, food, pharmaceutical packaging manufacturers,...

Technical parameters platen diameter Weight Instrument size Power supply The tests that can be performed with the instrument equipped with corresponding accessories are as follows: ① Equipped with a special sampler for ring pressure and a center plate for ring pressure test to conduct ring pressure test (RCT) of paper and cardboard; ② Equipped with edge compression (adhesion) test sampler and auxiliary guide block to conduct edge compression strength test (ECT) of corrugated cardboard; ③ Equipped with a peel strength test stand for corrugated cardboard adhesion (peel) strength test (PAT); ④ Equipped...

according to user requirements. ◆ Precision ball screw drive, aluminum alloy panel, high-quality stainless steel upper and lower pressure plates and reasonable design ensure that the instrument is durable. Our company's professional design and programming team can also upgrade the instrument. ◆ Chinese display on the touch screen, friendly man-machine interface operation. Complete the test fully automatically, with test data statistical processing function, micro-printer output, and can also be connected to a computer for operation. When connected to a computer, in addition to automatically memorizing...

2. Corrugated base paper flat compression test (CMT): The corrugated base paper sample with a size of 152mm×12.7 mm is placed in a flute tester to be heated and corrugated, and one side is fixed with tape, and placed flat between the upper and lower platen of the compression tester for crushing In the test, the specimen is subjected to increasing pressure until it collapses. CMT flat pressure test 3. Edge compression strength test (ECT) of corrugated cardboard: cut a 100mm×25 mm corrugated cardboard sample with the edge compression (adhesion) test sampler, and place it vertically between the...

4. Corrugated cardboard flat compression strength test (FCT): cut a certain area of corrugated cardboard samples (100cm2, 64.5 cm2 or 32.2 cm2) from the flat compression sampler, and place them flat between the upper and lower platens of the compression instrument for crush test , the sample is subjected to increasing pressure until it is crushed, the maximum force per unit area. FCT Flat compressive strength test 6. Thickness test of paper, cardboard and corrugated cardboard: the thickness of paper, cardboard and corrugated cardboard is directly measured under a certain pressure between two...

Service Commitment Company Introduction Free packaging inspection technical support. Guangzhou Biaoji Packaging Equipment Co., One-year warranty for instrument, free software upgrade service, and lifetime free Guangzhou Economic Development Zone. It is a technical support. company integrating R&D, production and sales Free to the factory to train the operation of of packaging testing instruments, packaging the instrument, qualified people issued equipment, modified atmosphere preservation graduation certificates, free accommodation equipment and other products, as well as providing third-party...

Address: No. 1, Minghua 3rd Street, Jinxiu Road, Guangzhou Economic and Technological Development Zone Tel: 020-8615 3789, 8615 3790 After-sales hotline: 4007886855 Website:https://www.gbpitester.com/ Email: [email protected]