Salt Spray Test ChamberOSH-60 Packaging Testing Industry Leader https://www.gbpitester.com/

Salt spray test chamber is used for the quality inspection and corrosion resistance test of a variety of materials, including metal plating, metal, electronic components, chemical coatings, paint, automobiles, motorcycles, metal ware, screws, springs, magnetic materials, organic and inorganic coating, anodizing, anti-rust oil industry etc. after the surface treatment. a) Temp. range: RT+10°C ~ 55°C (temperature up to 50C, thickeningPVC or PP material c) Controller time shown: 9.9s~9990hrs e) Testing method: Neutral salt spray test (NSS test), acetic acid salt spray test (AASS test), salt spray...

a) Salt spray chamber adopts the quality PVC reinforced hard plastic plate, the surface is smooth and anti-aging, anti-corrosion; b) Without any FRP material produced on the surface because of discoloration fibrosis. Plastic structure of the chamber is better to meet strong acid salt spray test under long-term without any damage. c) Cover is imported transparent impact-resistant plate which is convenient to test specimen when test, that can cover and the box with a water seal to prevent leakage of salt spray. 4. According to CSN, JIS, ASTM standards, can be set to constant temperature control:...

JIS Z2371-2000 Methods of salt spray testing etc. ISO 9227 Corrosion tests in artificial atmospheres (Note: 2 collection device is required, bigger models than ZH-SH-90 (270L) is required; In some versions, it specifies over 400liters is necessary) ASTM B117-18 Standard Practice for Operating Salt Spray (Fog) Apparatus (Note: 2 collection device is required, bigger models than ZH-SH-90 is required ) V-type shelf O-type shelf Standard measuring cylinder Temp. Indicator pointer Stalinite nozzle (replace it after 5000hrs) Fog dispersal system

Remark: Some small parts, such as due to material out of stock, it’s possible to use other parts instead in the similar brand. 14. After-sales service commitment 1) Our technical service department is responsible for after-sales service to share you with professional technical services including operation, maintenance. 2) Technical personnel on-site or telephone guidance for installation, free training available for those who purchased our machines and including basic catering accommodation.

3) Upon received service requirements from customer, within 24 hours (time difference) solutions will be provided for customers; for home services that the freight charge, catering accommodation shall be at buyer’s own expense. 4) One year free warranty; products due to quality problems will share the free maintenance exclude non-quality issues, man-made damage and wearing parts. Products share the life-long service and accessories and wearing parts provided. Note: GBPI has always been committed to the innovation and improvement of product performance and function. For this reason, product technical...

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel.： 86- 20-86153790 After Service：86-136 6047 2664（Moblie/WhatsApp) Website: www.gbpitester.com Email: [email protected]