Differential Pressure Method Gas Transmission Tester N560 2.0 Introduction The N560 2.0 gas transmission rate meter is a high-precision laboratory testing device integrating mechanics, electronics, and software. It is suitable for testing the gas barrier properties of plastic films, composite films, sheets, metal foils, etc., as well as the gas transmission rate of packaging containers such as bottles, bags, cans, and boxes made of various materials such as plastics, rubber, and paper. Test principle The N560 2.0 gas permeability tester uses the differential pressure method. The prepared sample is placed between the upper and lower chambers. A vacuum pump is used to evacuate the entire gas path system. Then, one atmosphere of test gas is added to the upper chamber to create a constant Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China

pressure difference between the upper and lower chambers. Under the influence of the pressure gradient, the gas permeates through the membrane from the upper chamber to the lower chamber. The system can calculate the gas permeability and other barrier performance parameters of the sample by analyzing the pressure change in the lower chamber. high pressure chamber limit outflow valve Automatic adjustment of the upper chamber pressure to maintain a pressure difference of 100 kpa between the upper and lower chambers at all times. After vacuuming Initial pressure under 27KPA Working principle Chinese...

Packaging Testing Instruments • Patented Core Technology for Highly Efficient and Precise Testing High-precision vacuum sensor, integrating a silicon piezoresistive chip with temperature compensation technology, achieves a full-scale drift of only 0.01% of reading/°C, enabling continuous full-scale measurement and avoiding pressure jumps during vacuum pumping. Constant temperature control reduces thermal drift, achieving repeatability <±0.2% FS. Patented automatic differential pressure maintenance technology automatically maintains the pressure difference across the sample (adjustable differential...

vacuum efficiency and low noise. A brand-new pneumatic gas path control system with automatic clamping and one-button sample locking provides convenience, labor-saving operation, and superior sealing performance.  Meets high-throughput, wide-range, and highly applicable testing requirements. The instrument is equipped with 6 chambers, supporting simultaneous testing of 6 identical or different samples. Operation is independent, data is independent, and testing efficiency is high. It has a wide testing range, with a lower testing limit as low as 0.01 cm³/(m²·24 h·0.1 MPa), meeting the testing...

industry. Personalized test reports can be set as needed, supporting multiple data output formats, electronic signatures, and online submission of audit reports.  Professional Calibration Services, Accurate and Reliable Data Our company possesses a National Reference Material Grading Certificate for Gas Transmittance, approved and issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, with reference material numbers (GBW(E) 130541 / GBW(E) 130542). We use national reference materials for instrument calibration and verification,...

Coated paper, carbon paper, silicone paper, aluminized paper, paper-aluminum-plastic composite sheet and other paper, cardboard Medicinal patch, Medical plaster treatment patch, warm patch, dysmenorrhea warmer patch Sanitary napkins, pads and other hygiene products Wine bottles, Coke bottles, peanut oil drums, Tetra Pak packaging, vacuum packaging bags, three-piece cans, Package cosmetic packaging, toothpaste tubes, jelly cups, yogurt cups, etc. Plastic, rubber, paper, paper-plastic composite, glass, metal bottles Gas transmission rate test of bags, cans, boxes and drums Add.: No. 3, Linjiang...

Factory configuration Standard Note: GBPI has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly. The above situation will not be notified. GBPI reserves the right of modification and final interpretation. Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 Web: www.gbpitester.com

GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was established in 2002 and is located in Guangzhou Economic Development Zone. It is an enterprise integrating R&D, production, sales of packaging testing instruments, packaging equipment, modified atmosphere refrigerator and other products, and providing third-party testing and reference material calibration services. It is committed to providing comprehensive, professional, high-quality products and technical services for the packaging, food, medicine, testing and other industries. Write industry standards with quality and become a leader...