Differential Pressure Method Gas Transmission Tester Packaging Testing Industry Leader https://www.gbpitester.com/

Introduction This product is designed and manufactured based on the differential pressure test principle and in accordance with ISO 2556 and other standards. It uses high-precision pressure sensors and automatic differential pressure maintenance technology to achieve high test accuracy. It is suitable for testing the gas permeability of films, sheets, papers, packaging and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range of high-efficiency gas permeability testing for high, medium and low gas barrier...

♦ Patented core technology, efficient and accurate testing Patented automatic pressure differential technology, automatically maintains the pressure difference on both sides of the sample (pressure differential can be adjusted arbitrarily), built-in high-precision pressure sensor, resolution up to 0.01 Pa, good stability, low failure rate. The semiconductor refrigeration chip automatically controls the temperature in both directions, and the temperature control accuracy reaches 0.1°C. Original imported vacuum pump, the limit pressure can reach 0.1 Pa, high vacuum efficiency and low noise. The...

industry's needs for data traceability. Personalized test reports are set on demand, supporting data output in multiple formats, supporting electronic signatures, and online submission of audit reports.  Professional calibration service, accurate and reliable data Our company has the "National Standard Material Grading Certificate" for gas permeability approved and issued by the "General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China", with the standard material number (GBW(E) 130541 / GBW(E) 130542); the national standard material is used...

Medicinal patch, warmer patch Medical plaster treatment patch, warm patch, dysmenorrhea patch, etc. Sanitary napkins, pads and other hygiene products Wine bottles, Coke bottles, peanut oil drums, Tetra Pak packaging, vacuum packaging bags, three-piece cans, cosmetic packaging, toothpaste tubes, jelly cups, yogurt cups, etc. Plastic, rubber, paper, paper-plastic composite, glass, metal bottles Gas transmission rate test of bags, cans, boxes and drums Oxygen, carbon dioxide, nitrogen, air, helium, etc. Factory configuration Standard

5. Drying dish (all samples need to be dehydrated and degassed for 24 hours); 6. Other accessories: used for calibration: a bottle of oxygen (above 99.999% purity), and other gases at your own discretion. Note: Guangzhou Biaoji has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly. The above situation will not be notified. GBPI reserves the right of modification and final interpretation.

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 After-sales hotline: 4007886855 Website: www.gbpitester.com Email: [email protected] WeChatQR code