HH-4 Digital Display Constant Temperature Water Bath Packaging Testing Industry Leader https://www.gbpitester.com/

Introduction Digital display constant temperature water bath is used for distillation, drying, concentration and warming of chemicals or biological products. Features This product is a sink type. The sink is made of stainless steel and the chassis is carefully made of high-quality cold-rolled steel plates. The temperature control part uses special electronic temperature control; a digital display displays the actual temperature in the pot. This series of products has the characteristics of beautiful appearance, corrosion resistance, stable temperature control, energy saving and practicality,...

♦ Safe use of electricity: This product uses 220V AC power supply. The power socket should be a three-hole safety socket. It must be properly grounded and the ground wire must not be connected to the gas pipe. ♦ Before powering on, water should be poured into the pot to above the partition. During use, the heating tube must not be exposed to the water surface, otherwise the heating tube will burn or even burst or the solder will melt and leak, causing electric shock, etc. ♦ Turn on the power and set the temperature: Press the SET key to set or view the temperature setting point. Press the SET...

flashing, indicating that the instrument has entered the setting state. Press the △ key to increase the setting value, press the ▽ key to decrease the setting value, and long press the △ key or ▽ key. The data will change rapidly. Press the SET key again to return to the normal working state and the temperature setting is completed. (If the temperature controller is an intelligent type, a temperature control manual is attached separately).  This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge head indicates the actual...

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel.: 86-20-86153790 After Service: 86-136 6047 2664 (Moblie/WhatsApp) Website: www.gbpitester.com Email: [email protected] Website QR code WeChatQR code