GX-C3 Ink Rub Tester Packaging Testing Industry Leader https://www.gbpitester.com/

Introduction GX-C3 Ink Rub Tester is designed based on international standards and is used to test the wear resistance of printed ink layers and surface coatings of related products. It can accurately evaluate the scratch resistance, ink layer adhesion and coating hardness of printed products, providing a scientific basis for printed product quality control and material performance optimization. Test principle The clean offset paper is rubbed against the printed surface under a certain pressure. After a certain number of times, the sample is removed to test the surface density. The ratio of the...

♦ The friction mode of arc motion can more realistically simulate the complex motion state in actual applications. ♦ The system provides four test functions: dry friction, wet friction, migration, and wet trace. ♦ It supports friction pressure selection, friction number setting, and friction speed setting. ♦ The host is equipped with a color touch screen, which is convenient for users to perform test operations quickly and conveniently. n MJ W® I i rwisiss ittps://www.gbpitester.co ti/ \J MM § \ Testing instruments

Factory configuration Standard configuration: main unit, 8.9N (2lb) load block, 17.8N (4lb) load block, friction pad. Optional: non-standard load block Note: Guangzhou Biaoji has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly. The above situation will not be notified. GBPI reserves the right of modification and final interpretation.

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel.: 86-20-86153790 After Service: 86-136 6047 2664 (Moblie/WhatsApp) Website: www.gbpitester.com Email: [email protected] Website QR code WeChatQR code