Introduction The coefficient of friction tester GM-6 is a measuring instrument developed and manufactured by the GBPI R&D team based on various test standards of GB, ISO, ASTM and market demand. The measured friction coefficient determines the smoothness and opening difficulty of the film. and uniformity can be accurately determined, so as to correctly guide the production. It is suitable for measuring the static friction coefficient, dynamic friction coefficient and peel strength of plastic films, composite films, aluminum foils, aluminized films, plates, rubber, ceramics and other materials...

The force sensor is easy to calibrate, and the special standard block is used for quick calibration, which is convenient and fast; The host is equipped with a liquid crystal display, which displays the coefficient of static friction and coefficient of dynamic friction in real time; Supporting control software, the interface is simple and clear, easy to operate; Display real-time curve, the curve can be zoomed; Sensor over-range automatic protection function, functional modular design, easy to maintain;

The instrument is equipped with a rigid sleeve as standard, and the spring can be switched to effectively prevent the slipping and sticking of the viscous film.

Note: GBPI is always committed to product innovation and improved performance, accordingly product technical specifications and appearance are subject to change without notice. GBPI reserves the right of modification and final interpretation.

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel.： 86- 20-86153790 After Service：86-136 6047 2664（Moblie/WhatsApp) Website: www.gbpitester.com Email: [email protected]