Packaging Testing Industry Leader https://www.gbpitester.com/

The friction coefficient tester is suitable for measuring the static friction coefficient and dynamic friction coefficient of plastic film, composite film, aluminum foil, aluminized film, plate, rubber, ceramic and other materials during sliding. The smoothness, opening difficulty and uniformity of the film can be accurately determined by the measured friction coefficient, so as to correctly guide production. Clamp the strip test sample, and wrap the slider with the sample to be tested, and then place the slider on the hanging hole of the sensor. Under a certain contact pressure, the conveyor...

The force sensor is easy to calibrate, and it can be quickly calibrated using a special standard block, which is convenient and fast; The host is equipped with an LCD screen to display the static friction coefficient and dynamic friction coefficient in real time; Optional heating function, wide temperature control range, room temperature to 100 C ,

temperature control temperature can be set as needed; Equipped with control software, the interface is simple and clear, easy to operate; The matching control software has a simple and clear interface and is easy to operate; The real-time curve is displayed, and the curve can be scaled; The sensor has an automatic protection function when it exceeds the range, and the functional modular design is easy to maintain. The instrument is equipped with a rigid sleeve as standard, which can be switched to use a spring to effectively prevent the slip and stick phenomenon of the sticky film.

Note: GBPI is always committed to product innovation and improved performance, accordingly product technical specifications and appearance are subject to change without notice. GBPI reserves the right of modification and final interpretation.

Service CommitmentCompany Introduction ♦ Free packaging inspection technical support. ♦ One-year warranty for instrument, free software upgrade service, and lifetime free technical support. ♦ Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. ♦ Instrument “trade-in” policy and provision of backup instruments in case of failure. ♦ There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. ♦ Set up a Reference Standards Development Center to provide calibration...

Address: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel.: 86-20-86153790 After Service: 86-136 6047 2664 (Moblie/WhatsApp) Website: www.gbpitester.com Email: [email protected] Website QR code WeChat QR code