Fully-automatic Total Migration Tester AUTO ZF1800G Introduction Fully-automatic Total Migration Tester AUTO ZF1800G has an integrated system design of water bath evaporation, heating, drying, cooling, and constant temperature weighing. The testing process is fully automated without manual operation. It is suitable for testing the overall migration (non-volatile matter, evaporation residue) and other items in the fields of purified water, pharmaceutical packaging materials, food packaging, cigarette tipping paper and chemical reagents. It can also be applied to the water content, loss on drying and other items of solid samples, and the total dissolved solid content test in water quality testing. Test principle Put the solution to be tested into the solvent storage dish of the automatic feeding system, and the empty cup is heated, cooled and weighed at the set temperature. Repeat the steps until a constant weight value is reached. Evaporate to dryness on a water bath below the boiling point of the soaking liquid. The cavity is heated to 105°C, dried and cooled. After the evaporating dish is cooled, the constant weight is judged with a balance (sensitivity is 0.01 mg), and the experiment is terminated to meet the constant weight requirement of the project. Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China

Standard Purified Water Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 Web: www.gbpitester.com

Packaging Testing Instruments Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 Web: www.gbpitester.com

Features  Cool and Hot Dual Cavity Integrated Control System, Automatic Upgraded Featuring with an integrated system of water bath evaporation, drying, cooling and constant weight, the testing is automatic, high efficiency and precise. Automatic feeding mechanical design, pneumatic valve control feeding, the residual amount is less than 0.1 mL, the testing does not need to wait and manual duty. The cavity has a built-in water bath, which can automatically detect the water level through the liquid level sensor, automatically add water to replenish water and drain, and automatically control the...

♦ Laboratory Intelligent IoT Platform The instrument can be connected to the IoT platform to realize network digital management. Remotely log in to the IoT platform and authorize to enter the instrument software interface, which can manage experimental data and remotely diagnose faults. Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 Web: www.gbpitester.com

Note: GBPI has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly. The above situation will not be notified. GBPI reserves the right of modification and final interpretation. Add.: No. 3, Linjiang Road, Huangpu District, Guangzhou, Guangdong Province, China Tel: 020-8615 3789, 8615 3790 Web: www.gbpitester.com

GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was established in 2002 and is located in Guangzhou Economic Development Zone. It is an enterprise integrating R&D, production, sales of packaging testing instruments, packaging equipment, modified atmosphere refrigerator and other products, and providing third-party testing and reference material calibration services. It is committed to providing comprehensive, professional, high-quality products and technical services for the packaging, food, medicine, testing and other industries. Write industry standards with quality and become a leader...