WA75/WA100/NA150-220XXXL1 Series
4Pages

{{requestButtons}}

Catalog excerpts

WA75/WA100/NA150-220XXXL1 Series - 1

Typical Features ♦Wide Input Voltage Rrange ♦ Typical Efficiency (Typ. 85%) ♦ Switching Frequency: 60KHz typ. ♦ Over Current / Short circuit /Over temperature protection, Self-furbish ♦ Input-Output Isolated ♦ PCB Mounting ♦ Metal Case L1 WA75- WA100/NA150-220XXXL1 Series—a high efficient power converter offered by Aipu. It features universal input voltage range, AC and DC dual-use, low ripple, low temperature rise, low power consumption, high efficiency, high reliability, safer isolation. The series widely used for industry, office and civil application. The application circuit in the datasheet is strongly recommended for harsh EMC environment. \J) Case Material (6) Packing Code (5) Output Voltage (3) Output Ways © Input Voltage (2) Output Power (J) Product Series Note: Due to space limitations, above is only a part of our product list, please contact our sales team for more items.

Open the catalog to page 1
WA75/WA100/NA150-220XXXL1 Series - 2

Technical Parameters Test Condition: Unless otherwise specified, data in the datasheet should be tested under the conditions of inputting nominal voltage, pure resistance rated load and Ta=25℃. Input Specifications Input frequency range Hz Standby power consumption Short-circuit power consumption Input current Surge current Output Specifications Output voltage accuracy Line regulation Nominal Load, full voltage range Load regulation Minimum load Single output 20MHz BM full load , Vo≤5.0V, ≤80mVp-p, Other≤120 mVp-p Turn-on delay time Nominal input voltage, full load Power off holding time...

Open the catalog to page 2
WA75/WA100/NA150-220XXXL1 Series - 3

Unit:单位(Unit:):mm mm(inch); Grid:2.54mm(0.1inch); Printed board vertical view; vertical view) 印刷版俯视图(Printed board 栅格间距(Lattic spacing):2.54mm(0.1inch) General tolerances: ±0.25mm(±0.01inch); 未标注尺寸公差±0.25mm Pin tolerances: ±0.10mm(0.004inch) Packing Code Note: If the definition of pin is not in accordance with the model selection manual, please refer to the label on actual item. Ripple& Noise Test: (Twisted Pair Method 20MHZ bandwidth) Test Method: (1) 12# twisted pair to connect, Oscilloscope bandwidth set as 20MHz, 100M bandwidth probe, terminated with 0.1uF polypropylene capacitor and...

Open the catalog to page 3
WA75/WA100/NA150-220XXXL1 Series - 4

Operating Temperature VS Load Curve Typical Application Circuit EMC recommended application circuit 1. Output filtering capacitor C1 is electrolytic capacitor, recommended to use high frequency low resistance ones, capacitance as 100uF/1A output current. Capacitance withstand voltage derating should be 80% or above. 2. Output filtering capacitor C2 filter high frequency noise, recommend 1μF ceramic capacitor, capacitance withstand voltage derating >80%. 3. TVS is a recommended component to protect post-circuits (if converter fails), recommend 600W model. 5V output recommend: SMBJ7.0A,...

Open the catalog to page 4

All Guangzhou Aipu Electron Technology Co. catalogs and technical brochures