video corpo

FD10-XXDXXA3(C) Series

FD10-XXDXXA3(C) Series

FD10-XXDXXA3(C) Series

Product catalog summary
Overview: The document provides technical specifications for the FD10-XXDXXA3(C)(-T)(-TS) series DC/DC converters by Guangzhou Aipu Electron Technology Co., Ltd. These converters are designed for industrial control, instrumentation, communication, power electricity, and IoT applications.
Product Features: The converters offer a wide input voltage range (4:1), 10W output power, and up to 88% efficiency. They feature low stand-by power consumption, fast start-up, continuous short circuit protection with self-recovery, and various protections against under-voltage, over-voltage, and over-current. The operating temperature range is -40°C to +85°C, and they have good EMI performance.
Specifications:
  • Input: Stand-by consumption is 0.05W with π filtering. Input under-voltage protection is specified for different models.
  • Output: Voltage accuracy is ±2.0% for the main circuit and ±3.0% for auxiliary circuits. Ripple and noise are specified under different load conditions. Protection features include over-voltage, over-load, and short circuit protection.
  • General: The converters operate at a switching frequency of 250KHz and have an isolation voltage of 1500VDC. The mean time between failures is 200,000 hours at 25°C.
EMC Characteristics: The converters comply with various EMC standards, including CISPR22/EN55032 for EMI and IEC/EN61000-4 series for EMS, with performance criteria specified for each test.
Design and Application: Recommended circuits for DC/DC testing, input ripple current testing, and EMC compliance are provided. The document also includes packing dimensions and pin-out specifications for different models.
Notes: The document advises using the product within specified ranges to avoid permanent damage and highlights that performance cannot be guaranteed outside the specified load range. Customization services are available, and specifications may change without notice.
See more

Catalog excerpts

FD10-XXDXXA3(C) Series-1

mnAIPULNION DC/DC Converter FD10-XXDXXA3(C)(-T)(-TS) Series Product Typical Features Test Condition: Unless otherwise specified, data in the datasheet should be tested under the conditions of inputting nominal voltage, pure resistance rated load and Ta=25°C. Application Field FD10-XXDXXA3(C) is a newly designed DIP 1X1 packed, 10W output power, ultra wide input range 4:1, low stand-by power consumption, isolated regulated output DC-DC converter, could be widely used for industrial control, instrument, communication, power electricity, internet of things field. Typical Product List Part No Input Voltage Range (VDC) Output Voltage/Current (Vo/Io) Input Current (mA) Nominal Voltage Max. Capa citive Load Ripple & Noise Efficiency (%)@outp ut full load, input nominal voltage Guangzhou Aipu Electron Technology Co., Ltd Email: [email protected] Tel: 86-20-84206763 Fax:86-20-84206762 HOTLINE: 400-811-8032 Website: http://www.aipulnion.com/ Guangzhou Aipu Electron Technology Co., Ltd reserves the copyright and right of final interpretation. Version: A/1 Date: 2019-01-

 Open the catalog to page 1
FD10-XXDXXA3(C) Series-2

AIPULNION DC/DC ConverterFD10-XXDXXA3(C)(-T)(-TS) Series CC RoHS 1. “*” are models being developing; 2. ”-T” suffix for chassis mounting, ”-TS” suffix for DIN-Rail mounting, DIN-Rail width is:35mm; 3. Max capacitive load is, when the power supply is fully loaded, the max capacity could be connected to output, if exceed, the power supply cannot start-up; 4. To reduce no load power consumption and improve efficiency of light-load, IC will be flitter frequency under no-load and light-load operating, output cannot be no load, at least with 10% load or above 470uF high frequency low resistance electrolytic...

 Open the catalog to page 2
FD10-XXDXXA3(C) Series-3

AIPULNION DC/DC ConverterFD10-XXDXXA3(C)(-T)(-TS) Series Cross Regulation Guangzhou Aipu Electron Technology Co., Ltd Add: Building B, No.4 Courtyard, Qixing Gang, Shiliu Gang, Haizhu Dis, GZ,CN Email: [email protected] Tel: 86-20-84206763 Fax:86-20-84206762 HOTLINE: 400-811-8032 Website: http://www.aipulnion.com/ Guangzhou Aipu Electron Technology Co., Ltd reserves the copyright and right of final interpretation. Version: A/1 Date: 2019-01-23 Page 3 of 8

 Open the catalog to page 3
FD10-XXDXXA3(C) Series-4

DC/DC Converter FD10-XXDXXA3(C)(-T)(-TS) Series 4M±(Unit:):mm EPBytSflttlE® ( Printed board vertical view ) tf l'a]4§(lattic spa cing):2.54mm(0.1 inch) jfc#&R‘t&ll±0.25mm m ft UP iI#£-M±0.10mm iM4(Unit:):mm ( Printed board vertical view ) fffltSl'a]!E(lattic spacing):2.54mm(0.1 inch) 5|MS£R ^'A'£±0.25mm *>aa^tfPiS#'^^±0.10mm Guangzhou Aipu Electron Technology Co., Ltd Add: Building B, No.4 Courtyard, Qixing Gang, Shiliu Gang, Haizhu Dis, GZ,CN Email: [email protected] Tel: 86-20-84206763 Fax:86-20-84206762 HOTLINE: 400-811-8032 Website: http://www.aipulnion.com/ Guangzhou Aipu Electron Technology...

 Open the catalog to page 4
FD10-XXDXXA3(C) Series-5

DC/DC Converter FD10-XXDXXA3(C)(-T)(-TS) Series Packing Code Test Method: a. 12# twisted pair to connect, Oscilloscope bandwidth set as 20MHz, 100M bandwidth probe, terminated with 0.1uF polypropylene capacitor and 10uF high frequency low resistance electrolytic capacitor in parallel, oscilloscope set as Sample pattern. b. Input terminal connect to power supply, output terminal connect to electronic load through jig plate, Use 30cm ± 2 cm sampling line, Power line selected from corresponding diameter wire with insulation according to the flow of output current. Application Reference: 1.The recommended...

 Open the catalog to page 5
FD10-XXDXXA3(C) Series-6

DC/DC Converter FD10-XXDXXA3(C)(-T)(-TS) Series Product Characteristic Curve Design Application 1.Recommended circuit DC/DC test circuit: Normal recommended capacitors: C0: 47-100uF; C1; 470uF. Guangzhou Aipu Electron Technology Co., Ltd Add: Building B, No.4 Courtyard, Qixing Gang, Shiliu Gang, Haizhu Dis, GZ,CN Email: [email protected] Tel: 86-20-84206763 Fax:86-20-84206762 HOTLINE: 400-811-8032 Website: http://www.aipulnion.com/ Guangzhou Aipu Electron Technology Co., Ltd reserves the copyright and right of final interpretation. Version: A/1 Date: 2019-01-23 Page 6 of 8

 Open the catalog to page 6
FD10-XXDXXA3(C) Series-7

AIPULNION DC/DC ConverterFD10-XXDXXA3(C)(-T)(-TS) Series 2.Input reflecting ripple current test circuit: Capacitor C choose low ESR ones, withstand voltage value should be bigger than max input voltage; Recommended Spec: Guangzhou Aipu Electron Technology Co., Ltd Add: Building B, No.4 Courtyard, Qixing Gang, Shiliu Gang, Haizhu Dis, GZ,CN Email: [email protected] Tel: 86-20-84206763 Fax: 86-20-84206762 HOTLINE: 400-811-8032 Website: http://www.aipulnion.com/ Guangzhou Aipu Electron Technology Co., Ltd reserves the copyright and right of final interpretation. Version: A/1 Date: 2019-01-23...

 Open the catalog to page 7
FD10-XXDXXA3(C) Series-8

DC/DC Converter Note: 1. The product should be used under the specification range, otherwise it will cause permanent damage to it. 2. If the product worked beyond the load range or below the minimum load, we cannot ensure that the performance of product is in accordance with all the indexes in this manual; 3. Unless otherwise specified, data in this datasheet should be tested under conditions of Ta=25℃, humidity<75% when inputting nominal voltage and outputting rated load(pure resistance load); 4. All index testing methods in this datasheet are based on our Company’s corporate standards 5.The...

 Open the catalog to page 8

All Guangzhou Aipu Electron Technology Co.,Ltd catalogs and technical brochures

  1. FA3-220SXXA2A

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.