*mydirectindustry

ZL50CN

Product catalog summary

Engine Specifications:
The wheel loader is equipped with a Cummins 6LT9.3 engine, compliant with Tier 2 / Stage II emission regulations. It delivers a gross power of 162 kW (220 hp) and a net power of 148 kW (201 hp) at 2,200 rpm. The engine features a peak torque of 890 N·m, a displacement of 9.3 L, and is turbocharged with six cylinders.

Transmission:
The loader uses a planetary type, power shift transmission with a double stage, four-element torque converter. It has a maximum forward travel speed of 37 km/h and a reverse speed of 14 km/h, with two forward speeds and one reverse speed.

Axles and Steering:
Both front and rear differentials are conventional, with an axle oscillation of ±11°. The steering is articulated with a relief pressure of 12 MPa.

Brakes:
The service brake is a caliper disc type, actuated by air over hydraulic systems. The parking brake is manually controlled pneumatically and actuated by air.

Hydraulic System:
The main pump is a gear type with a relief pressure of 17 MPa. The loader arm performance includes a raise time of 6.5 seconds, a dump time of 1.5 seconds, and a total cycle time of 11.5 seconds.

Loader Arm Performance:
The tipping load is 13,414 kg straight and 11,000 kg at full turn. The bucket breakout force is 167 kN, with a maximum dump angle of 45° at full height. The dump clearance is 2,970 mm, and the maximum hinge pin height is 4,020 mm.

Bucket Performance:
The reference bucket size is 3 m³, with various rollback angles at different positions.

Dimensions:
The loader measures 8,030 mm in length with the bucket down, 2,750 mm in width over tires, and has a wheelbase of 3,427 mm. The ground clearance is 485 mm, with a turning radius of 6,647 mm outside of the tire.

Tires:
The tire size is 23.5 - 25.

Operating Weights and Service Capacity:
The operating weight is 16,700 kg. Service capacities include a 300 L fuel tank, 18 L engine oil, 50 L cooling system, 300 L hydraulic reservoir, 45 L transmission and torque converter, and 32 L for each axle.

Contact Information:
Guangxi Liugong Machinery Co., Ltd., No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China. Phone: +86 772 3886124, Email: [email protected], Website: www.liugong.com

Note: Specifications and designs are subject to change without notice. Machines shown may include optional equipment.

Catalog excerpts

Standard Bucket Size 3 m3 Standard Breakout Force 167 kN Standard Dump Clearance 2,970 m

Open the catalog to page 1

Emission Regulation Gross Power Peak Torque Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Differential Front Type Differential Rear Type Axle Oscillation Steering Configuration Steering Relief Pressure Planetary type, power shift Double stage, four elements Tipping Load - Straight 13,414 kg Tipping Load - Full Turn 11,000 kg Bucket Breakout Force 167 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 2,970 mm Dump Reach at Full Height Discharge 1,200 mm Maximum Hinge Pin Height 4,020 mm Maximum Digging Depth, Bucket Level...

Open the catalog to page 2

ZL50CN

ZL50CN

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures