General Specifications
Model: CPC35
Power Type: Diesel
Base Capacity: 3,500 kg at 500 mm load center

Weights
Service Weight (unloaded): 4,500 kg
Axle Load (loaded/unloaded, front): 7,300/1,780 kg
Axle Load (loaded/unloaded, rear): 740/2,800 kg

Tires
Tire Type: Pneumatic
Wheels (front/rear): 2/2
Wheelbase: 1,700 mm
Tire Size (front): 7.00-12-12PRR
Tire Size (rear): 6.00-9-10PRR
Tread Width (front/rear): 1,000/970 mm

Mast
Max. Fork Height: 3,000 mm
Freelift: 135 mm
Height, Upright Lowered: 2,039 mm
Height, Upright Extended: 3,515 mm
Mast Tilt (Fwd/Back): 6°/12°
Carriage Width: 1,100 mm
Fork Spread (min/max): 244/1,080 mm
Fork Dimensions (T x W x L): 45 x 122 x 1,070 mm

Chassis
Length to Fork Face: 2,674 mm
Overall Width: 1,266 mm
Overhead Guard Height: 2,125 mm
Turning Radius: 2,400 mm
Fork Overhang: 496 mm
Right Angle Stack: 2,150 mm
Ground Clearance (min loaded): 130 mm
Ground Clearance (center of wheelbase): 140 mm

Performance
Travel Speed (loaded/unloaded): 19/18.5 kph
Lift Speed (loaded/unloaded): 0.4/0.45 m/s
Lower Speed (loaded/unloaded): 0.46/0.4 m/s
Max. Drawbar Pull (loaded): 1,780 kg
Max. Gradeability (loaded/unloaded): 18%/20%

Systems
Brakes (service): Foot/Hydraulic
Brakes (parking): Hand/Mechanical

Engine
Manufacturer: Xinchai
Model: A490BPG
Emission Compliance: China Tier II
Cylinders: 4
Displacement: 2.54L
Rated Power: 36.8 kW at 2,650 rpm
Max. Torque: 148 Nm at 1,900 rpm
Transmission Type: Powershift

Note: Specifications and designs are subject to change without notice. Machines shown may include optional equipment.
Contact: Guangxi Liugong Machinery Co., Ltd., No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China
Phone: +86 772 3886124
Email: [email protected]
Website: www.liugong.com