*mydirectindustry

CLG888

Product catalog summary

Engine Specifications:
The wheel loader is equipped with a Cummins QSM11-C315 engine, compliant with Tier 2 / Stage II emission regulations. It delivers a gross power of 235 kW (320 hp) and a net power of 212 kW (288 hp) at 2,100 rpm. The engine features a turbocharged and air-to-air intercooled aspiration system, with a displacement of 10.8 L and six cylinders. Peak torque is 1,600 N·m at 1,400 rpm.

Transmission:
The loader uses a countershaft, power shift transmission with a single-stage, three-element torque converter. It offers four forward speeds and three reverse speeds, with maximum travel speeds of 35 km/h forward and 24.5 km/h reverse.

Axles and Steering:
Both front and rear differentials are conventional, with an axle oscillation of ±13°. The steering configuration is articulated, with a steering relief pressure of 20 MPa.

Brakes:
The service brakes are wet disc brakes actuated hydraulically, while the parking brake is manually controlled with spring apply and hydraulic release.

Hydraulic System:
The main pump is a gear type with a main relief pressure of 20.7 MPa. The loader arm performance includes a raise time of 6.9 seconds, a dump time of 1.6 seconds, and a fastest total cycle time of 11.8 seconds.

Loader Arm Performance:
The tipping load is 25,755 kg straight and 21,960 kg at full turn. The bucket breakout force is 260 kN, with a maximum dump angle of 45° at full height. The dump clearance is 3,330 mm, and the maximum hinge pin height is 4,490 mm.

Bucket Performance:
The reference bucket size is 4.5 m3, with various rollback angles at different positions.

Dimensions:
The loader measures 9,270 mm in length with the bucket down, 3,170 mm in width over tires, and has a wheelbase of 3,530 mm. Ground clearance is 476 mm, with a turning radius of 6,760 mm outside of the tire.

Tires:
The tire size is 29.5 - 25.

Operating Weights:
The operating weight of the loader is 30,000 kg.

Service Capacities:
The fuel tank capacity is 445 L, engine oil is 33 L, cooling system is 41 L, hydraulic reservoir is 250 L, transmission and torque converter is 70 L, and each axle holds 65 L.

Contact Information:
Guangxi Liugong Machinery Co., Ltd., No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China. Phone: +86 772 3886124, Email: [email protected], Website: www.liugong.com

Note: Specifications and designs are subject to change without notice. Machines shown may include optional equipment.

Catalog excerpts

Standard Bucket Size 4.5 m3 Standard Breakout Force 260 kN Standard Dump Clearance 3,330 mm

Open the catalog to page 1

Emission Regulation Gross Power Peak Torque Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Differential Front Type Differential Rear Type Axle Oscillation Steering Configuration Steering Relief Pressure Turbochargered & Air-to-air Countershaft, power shift Single stage, three elements Tipping Load - Straight 25,755 kg Tipping Load - Full Turn 21,960 kg Bucket Breakout Force 260 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3,330 mm Dump Reach at Full Height Discharge 1,460 mm Maximum Hinge Pin Height 4,490 mm Maximum Digging...

Open the catalog to page 2

CLG888

CLG888

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures