*mydirectindustry

CLG888 III

Product catalog summary

Engine Specifications:
- Make: Cummins
- Tier: Tier 3 / Stage IIIA
- Gross Power: 250 kW (335 hp) @ 2,100 rpm
- Net Power: 238 kW (319 hp) @ 2,100 rpm
- Peak Torque: 1,674 N·m @ 1,200 rpm
- Displacement: 10.8 L
- Number of Cylinders: 6
- Aspiration: Turbo air-to-air aftercooled

Transmission:
- Type: Power shift
- Configuration: Counter shaft
- Torque Converter: Single-stage, three-element
- Maximum Travel Speed: 35.5 km/h (forward), 25.0 km/h (reverse)
- Number of Speeds: 4 (forward), 3 (reverse)

Axles:
- Differential Type: Limited slip standard (front and rear)
- Axle Oscillation: ±13°

Steering:
- Configuration: Articulated
- Relief Pressure: 20 Mpa

Brakes:
- Service Brake Type: Wet multi-disc
- Service Brake Actuation: Hydraulic
- Parking Brake Type: Auto and manual electronic controlled
- Parking Brake Actuation: Spring apply; hydraulic release

Hydraulic System:
- Main Pump Type: Vane
- Main Relief Pressure: 20.7 Mpa
- Raise Time: 7.2 sec
- Fastest Total Cycle Time: 12.4 sec

Loader Arm Performance:
- Tipping Load: 21,500 kg
- Full Turn Tipping Load: 18,400 kg
- Bucket Breakout Force: 260 kN
- Maximum Dump Angle at Full Height: 45°
- Dump Clearance at Full Height Discharge: 3,300 mm
- Dump Reach at Full Height Discharge: 1,513 mm
- Maximum Hinge Pin Height: 4,490 mm
- Maximum Digging Depth, Bucket Level: 118 mm
- Bucket Rollback Angles: 45° (ground level), 49° (carry), 63° (maximum height)

Bucket Performance:
- Reference Bucket Size: 4.5 m3

Dimensions:
- Length with Bucket Down: 9,350 mm
- Width Over Tires: 3,170 mm
- Wheelbase: 3,530 mm
- Wheel Tread: 2,420 mm
- Ground Clearance: 476 mm
- Turn Angle, Either Side: 38°
- Rear Angle of Departure: 25°
- Turning Radius: 6,760 mm (outside of tire), 6,335 mm (center of tire), 7,570 mm (bucket carry)

Tires:
- Tire Size: 29.5 R 25

Operating Weights:
- Operating Weight: 30,000 kg

Service Capacities:
- Fuel Tank: 445 L
- Engine Oil: 33 L
- Cooling System: 41 L
- Hydraulic Reservoir: 250 L
- Transmission and Torque Converter: 62 L
- Axles, each: 65 L

CLG888 III

CLG888 III

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures